The Perfect, Cost-Effective Reloading Bench

workbench 4-14At just $165– and even less with your 20% Off Coupon– you would be hard-pressed (see what I just did there?) to find a better reloading bench for a limited space than the Windsor 60-in. 4-Drawer Hardwood Workbench. At over 110 lbs. empty, it’ll stay in place when you lift up the press, and with 60 inches of table surface and four drawers, there’s plenty of room to work and store your supplies. The work bench also includes a bottom shelf for larger tools as well. A wood block vise is included to enhance usability and a clear lacquer finish protects the top of your shop bench from wear and tear.

“ClemBert,” a member of the FiringLine.com forum, came up with this swell mod for his Harbor Freight workbench. First, he modified two of the drawers into one deep drawer.

“I used hurricane framing ties to connect the drawers together leaving the bottom out of the drawer on the top.”

reloading bench drawers #1 

reloading bench drawers #2

He then made a 1.5″ platform for the reloading press, using leftover 3/4″ plywood glued together. A 2×4 was glued and bolted to the bottom of the platform. This allowed him to use the vice that comes with the workbench to hold the platform when in use.

reloading bench press platform #1

relaoding bench press platform #2

reloading bench press platform #3

After the platform was completed, he bolted the reloading press to it.

reloading bench reloading press #1

Harbor Freight workbench with reloading press setup

So when he wasn’t reloading and needed the work space, he had it at his disposal!

Harbor Whether it’s for reloading or other garage & shop hobbies, the Windsor 60″ 4-Drawer Hardwood Workbench from Harbor Freight Tools is a sweet deal!

Comments

    • Dave says

      Hi Boyd, here are the specs:

      DRAWERS: 21-1/2″W X 15-1/4″ DEPTH X 3″ DEEP.
      BOTTOM SHELF: 43-1/2″L X 16-1/2″W X 2-1/2″H (EDGE)
      TABLETOP: 60″L X 20″W X 2-3/8″H (EDGE)

      Hope this helps!

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>