As is always the case, this coming weekend’s Parking Lot Sale– our January Blowout– is garnering a lot of interest, particularly from those who are looking to add to their shop and garage for the coming year. Customers will find a number of products on sale that they’re familiar with (maybe some not so much) and have already formed opinions about. However, since there’s nothing like getting it from the horse’s mouth, here are ten customer reviews for products that will be among those on sale, some of which may persuade you in ways you didn’t expect (Note: prices on the individual product pages will reflect the PLS during its run. To see PLS prices now, click on the above image):
Bought this box two years ago and work out of it almost daily. I use the heck out of this thing and it rides in the back of our box truck work truck strapped in everywhere we go. It is loaded to the max and the wheels and drawers have never failed, and I cannot believe how much stuff I can fit in this box. With four longer carriage bolts you can bolt a 2×4 wood bumper across the back just under the lid and the height elevation lines up perfectly for the lower E-track strap system inside most commercial trucks and trailers. This is a great tool box, worth five times as much in my opinion. Cant go wrong with this.” B. Hill – Cameron Park, CA
I have own this lift for a year and love it! I lift my Harley Davidson Street Glide and Soft Tail with with no problem. Also, a couple of my friend’s Ultra Classics. I’ve used it for maintenance, and repair on my bikes. This lift has saved me a lot of cash and allows me to do all my own bike services. Not to mention all that free beer my buddies bring over to use my lift! Read all the info that comes with it. It will tell you to put hyd. oil in the lift. I’ve left bikes on it for weeks at a time and it holds firmly. Yes it’s heavy, but it works great.” USMCVet – AZ
I have a nice Hobart MIG, but it’s heavy and requires 240V. I bought this welder for welding in areas I don’t have 240V, but since I bought it, the Hobart has barely been touched. This welder is light, works great, and could not be more convenient. I’ve had it for a year or so, and it’s been dragged to races, and probably has ten or so hours of welding on it. It hasn’t missed a beat. If it died tomorrow, I’d happily go buy another one without complaint. I’ve done a fair amount with it… made a coffee table out of wrought iron, made a pit-cart, and swapped the entire body of a Toyota Pickup onto a Mercedes. It’s gotten some use, needless to say. It lays down nice welds for flux-core, and while it probably won’t last forever, the quality is surprisingly good. Gun feels a little flimsy and can get hot, but it’s never really bothered me. It’s one of my favorite HF purchases. Also, they include a full spool of wire, which impressed me.” Ted – Spartanburg, SC
I own and run a busy sculptural blacksmith shop and now have 3 of these carts. I have my MIG, Tig and Plasma cutter on each cart and I use them everyday. I love the working height of these carts and that they have well-built heavy drawers for storing tools and consumables. I am very hard on my equipment and tend to overload my carts with no problems. My work are is now cleaner and more organized.This cart is mostly assembled.You have to screw on wheels,casters, handle, tanks brackets and hose hooks. This took me about 15 minutes on the first cart and maybe 10 minutes on the other two.” Bender Dave – Maine
I am a patio installation professional, but I was working on a multifaceted concrete paver project on my own home. I wanted a low-cost saw that I could use exclusively for this purpose without slowing my crews down by borrowing their tools. One thing that I learned: this saw specifically states in the product manual that it is to be used with a CONTINUOUS RIM diamond blade, not segmented. However, I had already purchased a segmented diamond blade and it worked fine to cut my pavers.
I performed approximately 100 linear ft. of paver cuts on the first project, then another 50 linear ft. on the second project. Initially, the saw started up fine. This saw has a 15 amp draw, so make sure you size your extension cord properly as to not blow a fuse or trip a breaker. I used a 12-gauge 25′ extension cord to be safe. The pump worked great. I took special care to properly clean the pump and saw surface after each use. Plenty of power, smooth swift cuts that look great upon completion. Sliding guide plate was properly adjusted to make straight cuts, and saw arm can be used in a fixed or downward motion. Did many angled cuts. Used it on 2 3/8″ pavers and 4″ block, no problem.
In my experience a pump needs to be properly cleaned and no allowed to freeze or dry up after each use. I stored my pump in a bucket of water at room temperature between used and had no issues. Also, keep your slurry water changed regularly as to avoid it binding up your pump.
Next project planned is a tile project in bathrooms/kitchen. Most reviews say it works great. I am also planning to go ahead and buy the stand, as it will be more convenient.
I have owned and used many different wet saws during my career and one thing is for sure: these saws take a beating with brick dust, vibration, loading/unloading, etc. It’s my opinion that it’s ridiculous to invest $1k in a saw that lasts just as long as this one. I recommend this product to the novice because it’s safe if procedures are followed, and to the beginning professional who has knowledge enough to appreciate a good value on site.” XMark – Indianapolis, IN
I just used this with the HF hitch mount receiver. I pulled my 2500HD with 8-ft plow out from being buried in heavy snow to the frame on an incline (I was pulling UP hill!). I used a winch block to gain some extra pull, but the winch and mount had NO problems moving the truck. I attempted to pull the truck with other trucks and a loader with no luck. I couldn’t believe how easy it moved. I have used other name brand winches in the past, and yes they are faster and have a longer duty cycle (which I exceeded with the HF and had no signs of motor overheating) but they do come with a HEFTY price tag that I will no longer justify. If you don’t need it or use it everyday, you can’t afford NOT to buy this. Really, it would have cost me a few hundred for a tow. Overall its great product and well worth the money.” Sierra – CT
I bought the generator because my uncle has this one,, and he swears by it..Sure enough this bad boy powers the house …I have the fridge ,, upright freezer,, central air,, big screen tv,,, electric water heater ,, ADT…and it runs it all.(.Dont get crazy ,, but run the essentials)..Just have an electrician wire it up 30amp style to your electric pannel , and your golden..I did load it a little heave once and it threw the breaker on the generator,, but I just pushed the button to reset and we were rolling again..Easy pull start too,, buy a battery , and it just starts with the push of a button..also buy the wheel kit,, , you will need it to move it around.” Not-in-the-Dark, Crossville, TN
I put this motor on my roto-tiller last year and wanted to get a full year of service before writing a review. ‘Awesome’ is the word that comes to mind. WHAT AN EASY INSTALL!!! Fell right into the mounting bolts. The motor is easy to start and control, the most dependable I have ever used. Fuel use is great and it is pretty quiet for a 6 HP motor. I am buying another just to have a spare for any other projects that come up. Thanks, Harbor Freight, for a good price on a great product!” Garden Man – Swedesboro, NJ
I bought mine years ago to monitor the oil temperature in my turkey fryer, and it worked great! Then I used it to monitor the temp of my parts while powder coating (350 – 450 degrees), and it works great for that too. On performance engines with individual exhaust runners, I use it to spot a rich or lean cylinder. If you have a Weber kettle BBQ grill, it works good to monitor the cooking temp.” Curt – IL
I bought this in the winter of 2005, and it has been a life saver every year. I don’t know how it has lasted as long as it has, but I plug it in for recharge any time I use it and just keep it in my truck the rest of the time. I have helped dozens of other drivers along the way as well as myself at each year among the 4 cars we own. This is going on 7 years, and I just used it again this morning, and it still charges to over 14 volts, and it will still crank a 350 over and over. I plugged a USB DC outlet into the jump starter to see if i could charge my phone with it and it worked.Get one!” chefrick – CT