Vertical Jump – The Central Pneumatic 2HP, 29 Gal, 125 PSI Cast Iron Vertical Air Compressor

Get the boost you need to fully power your pneumatic tools and equipment! The Central Pneumatic 2HP, 29-gal. Vertical Air Compressor (#69865) allows up to 125 PSI of air at your control. Features include an easy-access handle, smooth rolling wheels and a fully-shrouded pump and motor for protection. Woodworking, sand blasting and metalworking shops– or anywhere where pneumatic tools are used– can benefit from this powerful air compressor! Out of the box, the cast iron vertical air compressor comes with:
  • An oil-lubricated pump for reliable performance
  • Twin capacitor motor for easy start-up
  • Adjustable handle and semi-pneumatic tires for easy maneuvering
  • Thermal overload protection
  • Dual pressure gauges and a built-in quick coupler

Here’s what a couple of happy owners of the air compressor have to say:

 ”I’m using this for sandblasting small items and for normal home use. It can supply a steady 60 pounds of pressure indefinitely, and obviously a lot more for brief periods of time. The compressor is relatively quiet. It takes about 2 minutes to fill up and shut off. The tank seems to hold its full pressure indefinitely, and is ready to use anytime. After a month of use, it seems like a good quality product.”  newshirt – Colorado Springs, CO
“I find uses for it EVERY DAY. Blowing up balls, handheld palm & air nailers,staplers, impact wrenches… blowing off sawdust & ? after weed eating, cooling off, too! EASY to move, inside if it’s cold out for easier starting, it won’t trip breakers OR blow fuses that way! DARN good value for the money! H-F stands behind their products!”  Ugly Gene – Pinee Bush, NY
This sturdy, capable vertical air compressor, priced at the incredibly low $357.99,  is currently available only at Harbor Freight Tools  brick n’ mortar stores. Pick one up for your shop and never worry about having enough power again.

Harbor Freight Celebrates International Girls Day

Recently, Teddy Robertson posted on her blog:

“Surprisingly, the Flint store is very female.   Of course, you see a lot of women in Home Depot and Lowes.  They are selecting paint colors or lighting, or bathroom fixtures.  At Harbor Freight women roam the drill bit aisles.  And what’s more, women—middle-aged women—are on the floor helping them with real tools.  Maybe years back they would have worked in the shop.  Today they work at Harbor Freight.”

Today, November 14, is International Girls Day, and it’s fitting that Harbor Freight Tools takes notice. The girls have been coming to HFT in growing numbers, sharing the checkout lines with the boys, carrying miter saws and cordless drills; on the Web, you now stumble across Girl Power blogs like Pink Toes & Power Tools and Ana White, sounding the alarm that women are taking over the home DIY projects.

That being said, I’d like to submit…
10 Tools Every DIY Girl Should Own
tape measure 30 ft
  1. Pittsburgh 30 Ft. X 1″ QuikFind Tape Measure #69081 – You can never have too many tape measures around the house, and you’ll like this guy because it displays the fractions. Not to say you’re working with a dumbed-down tool, something akin to a Jitterbug cell phone, but rather something that helps determine measurements faster and more efficiently. The tape extends a long way before it falls, and you’ll appreciate the rubber-wrapped case (not that you ever drop your tape measure, right?). Heavy-duty and helpful! $4.99plier set 7 piece
  2. Pittsburgh 7-Pc. Pliers Set #69355 – Pulling, pinching, stripping, bending. You can face all manner of tasks in the home, and these babies can be invaluable. And the quality-to-price ratio is NICE! 8.9932 pc screwdriver set
  3. 32-pc. Screwdriver Set #90764 – You’ll probably put the most mileage on this set around the house as it accommodates most all domestic jobs, including a bendable snake unit that’s awesome in hard-to-get-to areas! $7.99claw hammer
  4. Pittsburgh 16 Oz. Claw Hammer With Fiberglass Handle #47872 - I’m sure you have a hammer somewhere in the house. Hammers are like tape measures; it’s good to have a few around. Whatever you do, though, invest in a nice claw hammer. It’ll do a good job driving in nails, but it’;; also help you remove the bent ones if you make a mistake… which I’m sure never happens. Hammers are the great go-to’s for hanging pictures, putting together modular furniture or small woodworking projects. This fiberglass one provides a comfortable grip and less shock than the wooden ones.  $3.99 socket set 64 pc
  5. Pittsburgh 64 Piece 1/4″, 3/8″ And 1/2″ Socket Set #67995 – For nuts and bolts, and screwing in lag bolts in your beams for heavy wall-hangings and earthquake straps, putting together the tyke’s bike, or working on the car. You might think this set’s a bit overkill, but you never know when you’re going to need the odd-sized piece– and socket sets provide torque strength a mere wrench can’t come close to. $31.99torpedo level
  6. Pittsburgh 9″ Magnetic Torpedo Level #96676 - Take away the guesswork and eyeball calisthenics when trying to hang pictures or put up shelving. You’ll learn fast what a godsend this simple tool really is.  $7.99 staple gun
  7. Fasten Pro Three-Way Tacker Staple Gun Kit #96755 – For everything from craft projects to reupholstering chairs, making wood box valances, putting up plastic sheeting, running cords along the wall, window screening, and other DIY projects. Another tool you’ll love love love!  $6.99 5-drawer tool cart
  8. U.S. General Tool Cart, Five Drawer, 700 Lb. Capacity #69397 - You’ll need a place to store all of these handy tools and, take my word, you’ll outgrow a toolbox almost immediately. A larger one on rollers– like this 5-drawer favorite– is great to move around your home, craft room, studio or garage. It gives you plenty of room to organize and quickly access the tool you need when you need it!  $199.99 3-8 cordless drill 68239 19.99
  9. Drill Master 3/8″ Cordless Drill/Driver With Keyless Chuck, 18 Volt #68239 - A rechargeable drill is essential to have around for your light-to-medium DIY projects around the house. They’re light to carry and great for making holes, or using as a power screwdriver to speed up the fastening process. Got a remodeling project in your future? Get it!  $19.99 orbital palm sander 5-in
  10. Chicago Electric 5″ Random Orbital Palm Sander #69857 – If you’re restoring furniture, an old boat or other object of love, invest in an orbital sander. Great for getting a smooth finish on large surfaces, and the palm sander version gives you great control. $24.99
There are other great, handy tools for your collection that you’ll eventually want: stud finder, brad nailer, jigsaw, compound miter saw, circular saw… and Harbor Freight Tools has them all at tremendously low prices! It’s a great way to get your projects off the ground without smashing too many piggy banks.
Of course, there’s more to life than always working. As Teddy Robertson closed in her post:

“Last year toward the end of summer Dennis came home with battery powered fly swatter he’d gotten on sale for $3.99 (reg. $7.99).  We sat on the porch in a warm twilight sipping margaritas and swinging at mosquitoes.  Can’t beat Harbor Freight.”

You go, girl.

The Picasso of Airbrush Compressor and Sprayer Kits

It’s Pablo Picasso’s birthday!

Picasso was one of the most gifted painters of our time, no question. And yet, I can’t help but wonder how many more incredible works of art he could have given the world if he had a Central Pneumatic 1/6 Horsepower, 58 PSI Airbrush Compressor and Airbrush Kit.

airbrush compressor and kitThe pro-quality Central Pneumatic airbrush and compressor set (#69434) is a powerful tool, enabling you to get as creative as you want with the air brush. This airbrush compressor and kit works with lacquers, oil-based paints and latex-based paints. Here’s an airbrush kit with everything you need to make custom art– AND it’s easy to change colors, and easy to clean! For just $89.99 at Harbor Freight Tools, you can be the Picasso of the cul-de-sac!

While you’re picking one up, also consider tossing a Central Pneumatic Quick-Change Airbrush Kit #93506 (a mere $9.99) in the basket, so you can have five additional cups of paint ready with adjustable paint flow and spray patterns.

Here’s what just a few customers have to say about this great airbrush sprayer kit:

“This compressor is a fraction of the cost of the name brands, but works just as well. I’ve had complete success with it when used with acrylic or enamel model paint. It’s quiet, powerful and easy to operate. The water trap and pressure gauge are nice additions. I’d buy another one.”  Modeller – East Coast

“Great little unit for the price. I’ve had mine for a good 5-6 years. I use it for spraying glazes and underglazes on pottery with a dual action airbrush. It has been a great little workhorse for me!”  Steve the Potter – Philly area, PA

“Overall, best thing I’ve ever bought!”  Adam R – Atlanta, GA

OK, so maybe I was overreaching a bit. You probably won’t be as good as Picasso. Warhol, on the other hand…

Super Streetbike Review: 1/5 HP Airbrush Compressor

When it comes to riding your motorcycle, it’s not enough that it just runs good– you gotta look good. So make sure you check out Super Streetbike’s April 2013 issue (no, not the cover, lug nut– I’m talking about YOU looking good).

On page 58 there’s a nifty article on “Helmet Painting”– a cool, inexpensive way to self-express on the road. But, as writer Brian Hatano points out, you need more than a creative idea to get your point across; it takes technique. So, he takes you through every step you probably don’t think about when  imagining that wicked skull with flames and roses… namely, preparation, detail, method and materials. To get the hang of the spray gun skills, though, Brian suggests we first get the feel of it with a practice helmet:

“For practice jobs, any helmet will work, but starting with a lid in good condition will require less initial prep and give you more time to think about designs and color combinations.”

He then breaks down the process of executing a successful paint job– from disassembling the helmet to applying the clear coat– in crystal, concise detail. Great intel to have for when you’re ready to go for it.

Interesting, however, is that even though Brian was working in a shop equipped with a large air compressor, he opted instead to go with the Central Pneumatic 1/5 HP, 58 PSI Airbrush Compressor.

“Although we had a full size compressor available, we tried out the Harbor Freight Central Pneumatic 1/5th HP Airbrush Compressor and it performed better than units costing twice as much. Zac noted the quiet motor with no pulsing in the air supply.”

Constructed of sturdy anodized aluminum, the airbrush compressor is easy to clean and operate, and changing colors is a cinch. The airbrush kit works with lacquers, oils and latex-based paints to create pro-quality designs only limited by your imagination! It comes with a 22cc glass jar, 5cc metal cop and 5-ft. air hose– and, at a low $88.99, it’ll pay for itself over and over again!

While you’re shopping, also be sure to pick up the Central Pneumatic Quick-Change Airbrush Kit for just $11.99. This enables you to switch out paints in a flash with next-to-no downtime.

This awesome setup would also be perfect for custom painting:

  • Bike frames
  • R/C and other models
  • Auto body detail art
  • Tool boxes or cabinets
  • Furniture
  • Pottery
  • Metal sculpting
  • Signs and murals
  • Crafts
  • Toys
  • Cosmetic and Halloween makeup
  • Spray tanning
  • …and so much more!

Also, of course, if you want to support the team at the big game.

 

Garage Cleaning Pt. 1 – Getting the Toys Ready

Now that the weather’s getting nicer, step outside and take inventory of your outdoor toys: lawn mower, ATVs, bikes, motorcycles, dirt bikes… not a pretty picture, is it? The tires are flat, they’re dead as doornails and they’ve got a film of filth accumulated from four months of neglect (and maybe even some left over from last year’s use).

Time to get in gear, son. Here are a few tools from Harbor Freight that’ll jump start your spring and summer, and get your wheels back on track:

First of all, let’s put some air back in those tires. For that– as well as other light air tool jobs around the garage– I recommend the Central Pneumatic 3-Gall Oilless Air Compressor #95275.  Equipped in a compact 1/3-gallon tank, the compressor puts out a capable 100 PSI, plenty for brad nailing, stapling, inflating or air brushing. It includes a quick connect coupler, and features easy-to-read gauges and thermal overload protection. Easily stored in the trunk of any vehicle, this compressor is a portable and hassle-free light duty air supply. And at $59.99 ($49.99 with coupon ’til the end of March!), it will have paid for itself, saving you from all those trips to the gas station where they charge you a buck a pop!

Next, blast the dirt, dust and grime off your mower, ATVs and bicycles with the Pacific Hydrostar 1650 PSI Electric Pressure Washer #69488. This is a great pressure cleaner for any auto garage or shop. Capable of  up to 1,650 PSI, it can be employed to power-clean your  walls, yard equipment, RV, boat, and vehicles easily. We like using it on the exterior siding, molding and getting rid of wasp nests. Lightweight and portable, it features a 13′ pressure hose that can reach the tougher areas, and 5″ diameter wheels for smooth transport. The nozzle is also adjustable for wide spraying or tight, concentrated streams, which is great when you need lighter or harder pressure. Add Harbor Freight’s powerful Degreaser Concentrate and use it to power wash your greasy, grimy, cobweb-covered BBQ grill as well. Normally priced at $99.99, but now ’til the end of March, you can pick up one of these babies for just $89.99 with coupon!

Chances are, after being dormant for several months, some of your engines will need defibrillation. This is where the Chicago Electric Battery Charger and Engine Starter #66783 comes in. Imagine the rush of godlike power as you connect the positive and negative clamps to your dead mower, and with a maniacal laugh, yell “Clear!” and hit the ignition, bringing your creature back to life. The 10-amp charger setting on this unit recharges vehicle batteries in just 3-5 hours. The 2-amp trickle function maintains the charge when the battery is not being used, while the 55-amp setting provides a boost of added cranking power for autos in emergency situations. The battery charger includes battery leads and clamps to help you get back on the lawn, water, dirt and road quickly. Priced at $49.99, the battery charger and engine starter will pay for itself over and over again!

Now that you’ve finished moving all your machines outside and ready for action, it’s time to turn your attention to the garage itself. Tune in next time when we address getting the garage/shop cleaned, organized and ready for all your projects in 2013!

Hot Rod, Mustang Monthly & Super Street Bike Reviews: The Earthquake Impact Wrench

 Hot Rod magazine gave generous props to the Central Pneumatic Earthquake 1/2″ Impact Wrench (#68424) in the Parts & Stuff section of their January 2013 issue:

“This is the Cadillac of ½-inch impact wrenches. From Harbor Freight, known for great tools and cheap prices, the Central Pneumatic Earthquake ½-inch Impact Wrench is rated at 700 lb-ft and has three forward speeds plus reverse. It has twin hammers inside that help to make more torque easier. It has less vibration than the competition and, according to Harbor Freight, is the most powerful wrench in its class. One other cool feature is that the exhaust port is pointed away from the user, so no more blowing air in your face when using the tool.”

While I do love Hot Rod for being a renowned mag, full of informative articles, how-to’s, showcases, etc., they’ll have to go to the back of the line on this one. Harbor Freight’s Earthquake 1/2″ impact wrench is already a well-documented legend for, not only its power, durability and performance, but also the great price– just $94.99 (around $76 with a 20% off coupon)!

Back in October, 2012, the Mustang Club of America’s online magazine, Mustang Monthly, had this to say:

 ”Do we really need any excuse to go buy new tools for the garage? Of course we don’t, but the new Earthquake air tool from Harbor Freight gives you 700 reasons to pick one up when you need to get those stubborn, rusty fasteners off your Mustang!

“This professional class wrench (Item# 68424) delivers more power with better weight distribution, lighter materials and a more compact housing. Premium grade components with close tolerances give this tool a longer lifespan than conventional air wrenches.”

 Motorcycle enthusiast magazine Super Street Bike also had a few choice words regarding the Earthquake impact wrench in their January, 2013 issue:

“Harbor Freight returns with another price-conscious tool that should be in every garage: the Central Pneumatic Earthquake half-inch impact wrench. You may not need this tool for everyday wrenching on the bike, but when upgrading or replacing worn out sprockets requires the removal of a countershaft sprocket nut that will not loosen by hand, you’ll appreciate this tool’s power. The Earthquake Impact Wrench is an affordable way to get the job done with a torque range of 50-500 LBS.-FT., a working pressure of 90 PSI and three forward speeds. Make dropping a tooth or two with an aftermarket front sprocket easier with this tool.”

And it’s not just the magazines. Tool hounds at home also like the Earthquake impact wrench. For example, on this thread in GarageJournal.com’s forum, several members admitted their fondness for the air tool:

“I’ve had one for a bit over a year and have used it quite a bit. I have yet to come across something that I was unable to get off with it…”  strizzy

“I bought one a couple of years ago and couldn’t be happier with it. Incredible power and comfortable grip…. It’s been used and abused and just keeps on going. I’m sure keeping it lubed properly helps too. With an adapter and a Budd socket it even removed nuts from a truck that someone had swaged on with a cold chisel to make sure they NEVER came off. This thing had enough power to take them off right through the bunged up threads. I like it so much I’m thinking of buying their 3/8″ Earthquake…”  Curmudgeon

“I got the 1/2″ one too. I use it every once in a while to remove some rusty hardware on my 20 year old sports car (read: bolts that have not been touched in a long time) and the Earthquake does it without any trouble. Its a great purchase even if it was double the price. But since its not…stop typing and go buy one!”  sunshineFC3s

I couldn’t have said it better myself. The Earthquake impact wrench comes with:

+Precision machined to master-mechanic standards
+Most powerful wrench in its class
+Variable speed reversible
+Less vibration and lighter than the competition
+Handle-vented to direct exhaust away from user
+Twin-hammer delivers more torque to the anvil
+Three forward speeds

I know… you’re heading out the door. Don’t forget your 20% OFF COUPON!!

Harbor Freight Coupon: 18 Gauge 2-in-1 Nailer Stapler

Looks like the mucky mucks at Harbor Freight are going full-throttle into 2013, with über-audacious deals and coupons. Just click on the pic above and look at what they’re running between now and next Tuesday (Feb. 5)– you’ll PLOTZ!

The one I’m particularly interested is the Central Pneumatic 18 Gauge 2-in-1 Nailer/Stapler– going for $15.99 with coupon.

First, you get two tools in one, ’cause it drives both nails and staples; the 18-gauge staples can be 5/8″ to 1-5/8″ narrow crown, and the brad nails can go to 2″. From what the customer reviews say, this thing’s a veritable work horse which can be used on tons of projects:

Lay laminate flooring, install baseboards, shoe molding, crown molding and window trim. Reinforce bookshelves, chairs, tables, etc. Put up a fence or paneling, build wooden chests, cabinets or speaker boxes or do upholstery. Put together rabbit cages, humane animal traps or chicken coops. Use it for woodworking projects, winterizing the windows, build cat trees…

You get the point– if something needs doing, this’ll do it! And did I mention, it’s only $15.99*??!

For this, and other great deals, visit www.harborfreight.com!

 

*coupon runs until Tuesday morning, Feb. 5

Firebird Restoration Tools: Harbor Freight vs. The Competition – Part 6

Painting the Car

One of the most time-consuming and important projects you’ll perform in the auto restoration process is to paint the sucker. Painting a classic car is more of an art than a mechanical procedure, and doing a good job means summoning patience and a bit of perfectionism from your normally “that’s good enough”-self. That new, glossy paint job will make the slightest blemish look pronounced and no matter how awesome the ride’s going to look, believe me, you’ll be staring at that blotch like my teenage daughter obsesses over a zit.

First, choosing the paint: Most likely you’ll be compromising between the quality and budget. Most paints nowadays do a pretty good job of protecting the underlying metal, but cheaper paints can be less tolerant to sun, and will fade quickly if the car sits outside for any length of time. Regardless of the type of paint you choose, remember you get what you pay for. More expensive paints will last longer and retain their pigment better than the “bargain” paints.

Just a couple more things to cover before we move on to the equipment: proper preparation. Especially if it’s assembled, the car first needs be taped off, using masking tape and paper. You might be thinking, heck, I’ll just use newspaper. But newspaper is porous and can let paints– especially clear coat– bleed through onto the glass and trim, leaving a time-consuming mess. It costs a little more, but using a less porous paper– making paper better still–will make the job a lot easier. Plastic can be used to bag the engine bay and other areas that won’t be painted, and wheel covers or trash bags can be used to cover the wheels and tires. Once taped, the car is prepared by wiping it down with a cleaner (Naphtha is usually the main ingredient) to eliminate any oils or foreign materials from the surface that could cause fish-eyes or other blemishes. Finally, the car is wiped down with a tack-cloth to remove any dust or debris that could affect the paint job.

If you don’t have a lot of experience painting cars, following the instructions on the MSDS will help you apply a good paint job. If done properly, your paint job should protect your car and look great for many years.

Now on to the equipment. The primer is already on, so our designated restoration artisan turns to the…

Central Pneumatic 2-pc. Professional Automotive HVLP Spray Gun Kit $49.99

 

 

 

 

 

 

 

 

 

 

The HVLP spray gun’s material transfer gives you better, more consistent coverage than conventional spray guns, and with minimal messy over-spray. It comes with a 20 oz. gravity feed gun that operates at 30-35 PSI and detail gun that performs 25-30 PSI, and comes with stainless steel needles and tips on both guns. Our technician used this, along with a 33 Oz. Gravity Feed Paint Cup to spray two coats of red paint and three coats of clear. After which, he color-sanded the body with dish soap & water,  1200 Grit Sandpaper, using a 4-7/8″ Soft Rubber Sanding Block to knock off the “orange peel.” How does our spray gun kit compare to the competition’s?

  • Sears – US Freight Neiko Pro 2.0mm HVLP Gravity Speed Spray Gun w/Gauge #9924G – $59.99
  • Northern Tool – Wagner Double-Duty HVLP Sprayer #0518050 – $94.99
  • Home Depot – Husky HVLP & Conventional Spray Gun Kit #HDK00600AV – $79.99
  • Lowe’s – Kobalt Large Gravity Feed Spray Gun #SGY-AIR88 – $54.96
  • Grainger – BINKS HVLP Gravity Spray Gun Kit #98-3170 – $204.25

 

 

 

 

 

 

Following the pain job, Jeff buffed, using this polisher/sander and then, with the waxing, delivered the classic car to an incredible mirror gloss finish!

The polisher gives you all the power and control you need for a wide variety of applications. It generates between 1000-3500 RPM for a pretty nice polish. The LCD display shows the speed and the textured grip side handle provides comfortable handling. The polisher comes with foam and polishing bonnets as well as an 80 grip sanding disc. It’s also great for boats, travel trailers, stairs, etc– all at a great price. Now here’s the competition:

  • Sears – Wen Variable Speed 7″ Polisher/Sander #946 – $59.99
  • Northern Tool – Makita 7″ Sander & Polisher 3000 RPM #9227CX3 – $239.99
  • Home Depot – Wen 7″ Pro Sander/Polisher #946 – $59.99
  • Lowes – Porter Cable 4.5 Amp Ros Power Sander/Polisher # 7346SP – $119.00
  • Grainger – Makita 7″ Variable Speed Sander/Polisher #9227CY – $284.75

 

Once again, Harbor Freight Tools proves you get what you pay for– and more! Visit the homepage and Coupons Page, and check out other great deals the store has going.

Firebird Restoration Tools: Harbor Freight vs. The Competition – Part 4

The Underbody

If it’s going to be done right, every phase of restoring a vehicle is important. I mean, you wouldn’t just rebuild or replace the carb, throw on some new paint and upholstery, and call it done (although, that’s exactly what a lot of guys do). That thinking will bite you in the butt down the road– literally. That’s why the underbody gets the same attention as everything else. So… let’s talk tools:

Last month I started a series illustrating how much more bang for the buck a wrencher can get from  Harbor Freight Tools than they could the competition. Using the ’67 Firebird Restoration project as my example, I’ve been breaking it down phase by phase, comparing the prices of tools used in the project with similar (if not exact) products that the competition advertises. The competitors I chose were Sears, Northern Tool, Home Depot, Lowe’s and Grainger. Exact matches weren’t always found, so I substituted the closest product available. As I’ve said before, I don’t think this compromises the test because we’re only talking about differences in size and shape, not power or function.

In the first segment, we looked at Harbor Freight’s tools used in the vehicle’s disassembly video. In the second, we explored price differences on the engine removal phase. In the third installment, we featured the tools employed in the stripping and priming process. This time we’re only featuring two tools for the underbody:

 

 

 

 

 

 

 

 

 

Using a heavy-duty industrial de-greaser, this powerful 2000 PSI gas pressure washer is unstoppable against old, caked-on grease, oil and dirt that’s accumulated on your vehicle’s underbelly. Pumping out 1.6 gallons a minute, the machine is EPA-certified and easily portable on two rubber wheels. It’s got a mighty four-stroke 4 HP gas engine with a cast-iron cylinder for maximum durability, pump-overheat protection, overload protection and low-oil shutdown for extra safety.

  • Sears – Craftsman 2200 PSI Gas-Powered Pressure Washer – $249.99
  • Northern Tool – Wel-bilt 2500 PSI Gas-Powered Pressure Washer – $249.99
  • Home Depot – Simpson MegaShot 2200 PSI Gas-Powered Pressure Washer – $269.99
  • Lowe’s – Simpson MegaShot 2200 PSI Gas Pressure Washer – $269.99
  • Grainger – Generac #5987 2500 PSI Cold Water Gas Pressure Washer – $499.25

 

 

 

 

 

 

 

 

 

 

You can’t beat the quality and value of this great, little blaster! In the video they used it for blasting rust from the undercarriage, but that’s just one of a zillion things you can use this tool on. Car restoration, firearm parts, tool cabinets, barbecues, metal beams, aluminum wheels, tools, to name a few. Use slag media, silica, walnut or pecan shells, sand, glass bead, steel grit and more. The portable abrasive blaster kit comes with a blast gun, 15-ft. material hose and a hopper than can hold up to 50 lbs. of abrasive media. Just hook it up to a 1 HP or larger compressor and easily remove paint, rust, graffiti, corrosion and scale.

  • Sears – Sears Portable Sand Blaster – $119
  • Northern Tool – ALC Suction Abrasive Blaster – $49.99
  • Home Depot – Powermate Air Sand Blaster – $55.99
  • Lowe’s – N/A
  • Grainger – ALC Siphon Blaster – $171

Check out The Video to see the tools in action during the underbody stripping procedure.

In the next installment, we’ll take a look at the tools used for the Engine Rebuild, and compare them to the competition’s. Until then!