Handle a Ton of Work with a Hand-Operated Arbor Press!

With the 1 Ton Arbor Press (Central Machinery 3552) from Harbor Freight Tools mounted to your workbench, small production and assembly jobs are a breeze! Installing and removing bearings, staking, pressing shafts and more are all done quickly and efficiently with minimal effort thanks to the 1 ton force applied by this mighty but small arbor press. Its all-metal construction combined with a large base make this arbor press sturdy and durable so you can power through a whole variety of applications! Even installation is easy with the mount holes conveniently built into the press. Just secure the tool to your workbench and you’re ready to go.

image_18449

Safely Handles Small Jobs!

In case I’m not pressing the point enough, check out what some actual customers had to say:

“I am using this press to squeeze the juice of vegetables and fruits from the production of a meat grinder. It is tough enough for that and its four inch throat guarantees a small pressing area and ensures enough pressure to adequately squeeze my fruit and vegetable pulp through a flour sack towel. That gives me juice without the pulp. I am not using it for its intended use so my comment may inspire someone else to find another non-standard use for this arbor press. I no longer work on cars professionally, but it may serve double duty at some time in the future.” — xenonracerx from Las Vegas, NV

“I use this to press bearings in and piston pins, also have fixed body panels with it. A+ and a great value cant go wrong” —  Joel from Rogers, MN

“I use this press to press in leaf spring bushing on almost all my suspension projects. I mounted it into my vise and press in all the bushing with no problem. A lot faster than using my 20 ton h frame press.” — James the fabricator from Lakewood, Wa

And I’m willing to be that James the Fabricator is telling the truth despite his profile name.  Bigger or more powerful presses can’t handle the smaller jobs tackled by the 1 ton arbor press. For smaller work pieces, you’ll want to be sure to use a press that can handle the work safely while still applying enough force. And while you’re at it, be sure to get a good look at Harbor Freight’s line of vices too. The 6″ Portable Carpenter’s Vise or the 4” Drill Press Vice are a great addition to work you may be doing on the arbor press.

You’ll be hard pressed to find another arbor press for sale at the same low cost as this one offered by Harbor Freight. Other retailers sell similar presses for much more!

Comments

  1. Judy says

    I bought the 10×12 greenhouse. I got to page 17 in the manual and it said to slide a white bushing (81) over the double brace bolts (78) then place the center hole of each Side Diagonal strut (80) over the end of (78) and secure with a bolt (67). The problem? There are no center holes drilled in any of the struts (80) I got! Now what?