’67 Firebird Restoration Project: Part 4 – Strip & Prime!

Welcome to the fourth installment of the Harbor Freight Tools 1967 Firebird Restoration Project.

As we shared earlier, HFT invited Jeff Tann– car enthusiast and former Rod & Custom editor — to fully restore a legendary First Generation Firebird using only products from Harbor Freight Tools. The car is all original, with a 400/325-hp V8 engine, so he’s basically tackling the project “from scratch.”

In Part 1, we were given a tour of the original vehicle, inside and out, and presented Jeff’s challenge. In Part 2, we followed the body-dismantling process and introduced the U.S. General 700 lb. Capacity 5-Drawer Rolling Tool Cart, which housed the Pittsburgh Professional 301-Piece Mechanic’s Tool Kit. Also in this segment, we saw how Jeff made quick business of the job with a Central Pneumatic 3/8″ Professional Air Ratchet and 1/4″ Mini Air Ratchet Wrench. In Part 3, Jeff lifted the engine using  a 1-Ton Capacity Foldable Shop Crane and then removed the tranny from it with a Central Pneumatic 1/2″ Twin Hammer Air Impact Wrench before he mounted it on the Central Machinery 1000 Lb. Engine Stand, and proceeded to take it apart.

Part 4 takes us to the exciting first step of transformation– sanding and priming the car. For the stripping, Jeff used a Central Pneumatic 6″ Dual Action Air Sander and the Jitterbug Orbital Air Sander.  That done, he then laid down the primer like a rock star, using the efficient, low-price Central Pneumatic Professional HVLP Gravity Feed Spray Gun.

You might be asking, why is Harbor Freight doing this? Because they can! It’s their way of saying they have everything you need to complete this job– and do it like pro– for a fraction of the cost other tool stores would charge you!

So, keep watching. There’s lots more ahead!

 

Here Comes Honey Chip Chip

Now that fall is here and winter in the not-too-distant future, death is all around us: dead leaves, dead branches, and all other sorts of recently-deceased debris– a virtual backyard apocalypse. Make disposing the remains easy on yourself with a powerful chipper/shredder or leaf eater/shredder from Harbor Freight. Choose from these high-performance models:

Quickly reduce piles of leaves and small branches into useful mulch. Mulch is a standard form of winter protection for many shallow-rooted plant, acting as insulation for the soil and plant roots. This powerful 14 amp electric chipper-shredder can handle limbs up to 1-1/2″ in diameter and its rugged polypropylene hopper won’t rust or dent. Also, it maneuvers easily through the yard on smooth-rolling 6″ wheels.

 

This gas-powered dynamo is an essential tool for landscapers or anyone cleaning up their yard. The chipper-shredder handles limbs up to 1-1/4″ thick and features a four-chipper-blade design to quickly turn limbs, twigs and small branches into mulch, perfect for flower beds and vegetable gardens. Easy on gas, tough on branches, this little chipper eats brush like it’s nothing.

 

The Godzilla of the group! Easily decimate tree branches, leaves and vines with this wide-mouthed, 11 horsepower gas-powered chipper-shredder. The wood chipper chute handles branches and vines up to 2-7/8″ in diameter while the leaf-hopper shreds leaves and grass clippings up to 3/8″ in diameter. This dynamic chipper/compost shredder features a dual-blade design with both a chipper blade and impeller blade. Even though it’s a tree-thrashing brute, it moves and maneuvers easily on smooth-rolling pneumatic tires.

 

When life hands you thousands of dead leaves, make mulch! This efficient, economical, and ecological electric shredder makes it simple to get rid of leaves by breaking them down into serviceable mulch or compost for your yard and garden. No more laborious bagging of yard waste! Choose between fine, medium and coarse shredding levels.

Shop Harbor Freight for the right heavy-duty chipper and/or shredder for your needs. As always, you’ll find great performance at incredibly low prices!

 

Grand Openings in Southaven, MS and Vista, CA!

September 24, 2012– On Wednesday, September 26, at 8:00 a.m., the doors are swinging wide at the two newest Harbor Freight Tools stores– in Southaven, MS and Vista, CA!

The Southaven store, located at 725 Goodman Road (Southaven Commons Shopping Center), will have a ribbon-cutting ceremony at 8:00am, hosted by the Southaven Chamber of Commerce.

“Harbor Freight Tools is a valued new member to our Chamber and are proud they have chosen the City of Southaven as one of their newest locations. We look forward to a long and exciting working relationship with one of the nation’s largest tool and equipment retailer” states Ginger Adams, Executive Director of the Southaven Chamber of Commerce. “We wish them great success and will make every effort to make them prosper and grow in our community.”

The Vista Chamber of Commerce will also have a ribbon-cutting ceremony at the Vista location, which is located at 820 Civic Center Drive in the Vista Center Shopping Center.

“The Vista Chamber of Commerce is proud to have Harbor Freight Tools join our local business community and our chamber of commerce. We look forward to dynamic working relationship with one of the nation’s largest tool and equipment retailers,” stated Bret Schanzenbach, CEO of the Vista Chamber of Commerce. “We look forward to their success and involvement in our community. The Vista Chamber is excited to do everything it can to help them grow and prosper here.”

Both Grand Opening Sales will feature huge discounts at up to 80% off at both locations, and will be accompanied by ribbon-cutting ceremonies at 11:00a.m. Come join the celebration, browse the enormous selection of quality tools and hardware, take advantage of the incredible specials, or just come by and say “hello!”

Store hours are MON-SAT 8:00AM-9:00PM and SUN 9:00AM-6:00PM.

See you there!

’67 Firebird Restoration Project: Part 3 – Engine Removal!

Welcome to the third installment of the Harbor Freight Tools 1967 Firebird Restoration Project.

For first-time readers: HFT invited Jeff Tann– car enthusiast and former Rod & Custom editor — to fully restore the legendary muscle car using only discount tools from Harbor Freight. The car is all original, with a 400/325-hp V8 engine, so he’s basically tackling the project “from scratch.”

In Part 1, we were given a tour of the original vehicle, inside and out, and presented Jeff’s challenge. In Part 2, we followed the body-dismantling process and introduced the U.S. General 700 lb. Capacity 5-Drawer Rolling Tool Cart, which housed the Pittsburgh Professional 301-Piece Mechanic’s Tool Kit. Also in this segment, we saw how Jeff made quick business of the job with a Central Pneumatic 3/8″ Professional Air Ratchet and 1/4″ Mini Air Ratchet Wrench.

This time we follow Jeff as he lifts the engine, using a 2-Ton Capacity Foldable Shop Crane. It’s probably the first time the 45-year-old engine’s been taken out since it was on the assembly line, so it’s not gonna be pretty. Jeff then removes the tranny from the engine with a Central Pneumatic 1/2″ Twin Hammer Air Impact Wrench before he mounts it on the Central Machinery 1000 Lb. Engine Stand, and proceeds to take it apart.

Remote Possibilities

What do you think of when you think “Harbor Freight?” Tools, right? Maybe generators or gas engines or solar panels or parts washers– certainly not radio-controlled models. And yet, Harbor Freight’s got a nice little selection of RC craft, including planes, cars, a helicopter and a speedboat!

Venom Ozone RC Helicopter

The Venom Ozone 3.5 Channel Remote Controlled Helicopter is a particular favorite in the stores and on the Harbor Freight website. Sporting twin 130 brushed motors, it’s easy to fly, easy to land, and is ready to launch in minutes. Durable, responsive and a blast to fly!

 

P51 Mustang

Modeled after the fearsome long-range fighter-bomber that took out over 4,950 aircraft in World War II, the RC P51 Mustang is pre-built and ready to fly within minutes. Operating via a 4-channel, 72 mHz digital proportional radio control system, this awesome warrior soars with amazing speed and handling, and operates at up to a 1,600-ft. range.

 

RC Speedboat

Here’s a great way to pass the time when the fishing is slow. Harbor Freight’s radio-controlled Speedboat will go fast enough to shoot up a rooster tail,  maneuvers like a dream, and will keep you captivated for hours. For a great read, check out the customer reviews to see how some folks modified their boats for even bigger performance. A lot of power for a remarkably low price.

Check out these and the other RC cars and planes– in the store and online!

 

 

Welterweight Welder

Maybe you’ve been thinking about getting into welding. Perhaps you’ve had a run-in  or two with a home or car repair where you thought a welder would be just the thing. Or maybe a buddy recently modded a grill or trailer, or made a cool metal rack on the cheap with his handy-dandy welder, and you thought, ‘Dang… I’d like to do something like that.” Well, join the club. But before you go out and get the coolest, top-of-the-line welder, you need to hang on and know a few things.

  • Practice

Welding–like any craft– is a skill . It takes a lot of practice to get even close to being competent. When you first take hold of that welder, for heaven’s sake, don’t use it on something you don’t want ruined. Practice on LOTS of scrap metal– preferably around the same thickness as what your first project is going to be. You should be able to find some good stuff at your local metal or welding shop. Get used to the action and the way the metal reacts. Work on avoiding “bird poops” (the unsightly metal globs you sometimes see on rough welding jobs), and start feeling comfortable with your developing “technique.” Then, use some scrap to make something you don’t care about, like a homemade grill for a fire pit or bookends out of 350 engine pistons. Only after you’ve gotten a handle on that kind of stuff should you attempt a project that does matter.

  • Start Small

You wouldn’t learn how to ride a motorcycle on a Harley Fat Boy or start target shooting with a Tac-50. The same goes with your first welder. Welding is not a low-cost activity, so before you know you it’s something you want to get into, starting smaller and cheaper is the way to go. An ideal model with which to “get your feet wet” is the popular Chicago Electric 90 Amp Flux Wire Welder. It’s easy to set up, can weld metal up to 3/16″ thick and is perfect for small projects around the house and garage. A quick browse through the 90 amp’s customer reviews will give you an idea of what it’s capable of. Here are a few comments:

“I’m a former auto technician and have welded hundreds of times over the years using various machines. I was hesitant to purchase this item… but after doing so I am thoroughly pleased. It’s was very easy to set up. Made numerous repairs to an existing metal decorative fence. It handled the 12 ga metal without hesitation and I decided to attempt it on another project that was heavier metal. It worked flawlessly producing strong welds on 3/16 metal… Overall a great machine at a great price. I’m completely pleased!”  DennisF – Temple, TX

“Very easy and fun to use. Fabricate anything I need to my (on) trucks and machinery. Very happy!”  Landscape Designer – NJ

“Wow, this is nice. How could you go wrong with the price, well worth the money. I’m going to buy one for my boy who has never welded before. Thanks for a great product.”  Boonie – Mt. Vernon, IL

“I needed to do some light welding on my car. I figured it was either hire someone or get my own welder and teach myself. I bought this with a 25′ #12 gauge extension cord and an auto dark helmet. I had never used a welder before, I don’t even have a book except the book that came with this welder.”  Mike – Hollywood, FL

“It’s a awesome welder and works great, can’t ask for much more. I love it. I made prerunner bumpers and skid plates, also welded up a few exhausts. I even made a welding cart and welding table with welder. Overall, buy this welder and make stuff with it and sell the stuff you make well worth the money!”  T-Man – redneckville

Once you’ve mastered your 90 Amp Flux Wire Welder, you can expand to bigger projects and maybe move up to a Chicago Electric 170 Amp MIG/Flux Wire Welder or 180 Amp MIG/Flux Wire Feed Welder for more power and thicker metal.

  • Safety

Obviously, the foremost thing to keep in mind about welding is safety first. Most of it is common sense, but for the sake of health and property, keep in mind that welding can be dangerous. Welders throw sparks, they can cause fire. Be sure to remove anything flammable from the area you’re working in, and if you’re welding on the grass or near bushes, it’s probably a good idea to wet down the ground. Also, wear a long-sleeve shirt, pants without cuffs, and long Welders Gloves. Of course, also get yourself face and eye protection. I particularly like the Chicago Electric Auto-Darkening Helmet with Blue Flame Design.

Once you get the hang of it, working on welding projects can be a blast– for the home, the car and all kinds of hobby projects. And Harbor Freight’s got the perfect, low-cost way to start!

Seismic Power In Your Hands

If you spend any time doing car repairs, restorations, mods or tire changes, you know by now that doing the work without air tools is like carrying an armoire upstairs by yourself. Sure, you’re man enough to do it (probably), but why? Get the pneumatic tools, Hercules– and the first one you should go pick up is the Central Pneumatic Earthquake 1/2” Air Impact Wrench at Harbor Freight.

As mentioned in Mopar Muscle, Hot Bike, Street Chopper and Baggers magazines, this pro-class impact wrench delivers more power with better weight distribution, lighter materials and a more compact housing. Its premium-grade components give this tool a longer lifespan, less vibration and a much lower price than the competition. What’s more, it’s the most powerful wrench in its class!

Visit Harbor Freight Tools for this and other powerful, quality Earthquake air tools and gear up your garage for any tough job that comes along.

Truckin’ Magazine: The Ultimate Work Truck– with Harbor Freight Tools

The Ultimate Work Truck Stocks Up on Harbor Freight Tools

If you thought “ultimate work truck,” how do you envision it might be outfitted? The staff at Truckin’ magazine recently took up that challenge, and in their October and November 2012 issues ran a 2-part series on creating the “Ultimate Ford F-150 Work Truck”– with a little help from Harbor Freight Tools!

Taking a 2012 F-150 SuperCab in Part 1, they installed a cool bed slide, a monster ladder rack (capable of holding 1,000 lbs) and a sweet commercial-grade diamond-plate toolbox.

In Part 2, they went on a shopping spree at Harbor Freight Tools and picked up a Predator 4000 Watt Portable Generator– to which they installed a shock/motion-activated alarm in the back of the truck, lest any covetous individuals think bad thoughts– a 17 Ft. Type 1A Multi-Task Ladder as well as a full stock of tools for the toolbox:

Then to fortify their heavily-equipped new rig, they installed a ladder lock, and secured the toolbox and everything else with a myriad of cables and locks, including the hitch. The end result: a “certifiable worksite on wheels.”

Take a peek at Truckin’ magazine’s drool-inducing articles– with lots of pics– and while you’re at it, check out the low prices and great reviews of the aforementioned tools on Harbor Freight’s website!