Creekstone Submersible Fountain Pumps

Pure pumping power—nothing watered down here!

Whether it’s a small garden fountain, large pond or anything in between—you want a pump that’s efficient, reliable and powerful. Look no further than the Creekstone line of submersible pumps!

158 GPH Submersible Fountain Pump
Bring your fountain or water feature to life with this submersible pump generating up to 158 gallons per hour. Features include an inline flow control valve, easy-to-remove inlet screen for quick cleaning and a removable stand with suction cup feet for positioning.

Straight out of the box this pump is easy to use and works effortlessly. I use it with a 3ft fountain on my porch. – Scott, Wayland, LA

 

200 GPH Submersible Fountain Pump with Auto Shutoff
When you need a bit more muscle, this submersible pump generates up to 200 gallons per hour. In addition to an automatic low-water shutoff sensor to prevent motor burn-out, this pump also features an easy-access filter, inline flow control valve and two adapters—sprinkler and waterfall heads. This pump is not available in California.

Used this pump for a decorative fountain that pumps about 4 feet in vertical height. Perfect flow rate …  Swamped, SW Florida

 

264 GPH Submersible Pond Pump
This high-quality pump generates up to 264 gallons per hour and will add life and beauty to your pond. With the two included adapters, you can shoot a fountain of water skyward or create the look of a natural spring. Other features of this submersible pump include an inline flow control valve, removable filter for easy cleaning and removable stand with suction cup feet for placement.

The pumps perform as well if not better than originals, and it beats paying the ridiculous pricing that the big box stores want for essentially the same pump. – Tennessee, Cleveland, TN

 

620 GPH Submersible Pond Pump
For larger ponds or water features, this submersible pump generates up to 620 gallons per hour. The pump features an inline control valve, removable filter for cleaning, removable stand with suction cup feet and two adapters so you can shoot a fountain of water upward or create the look of a natural spring.

Bought to replace pump in small pond with fountain and waterfall. Old pump was 500 GPH and the filter on it was never right. Paid $99 for it. The new one from Harbor Freight is 620 GPH and works perfectly at almost one third the cost. – BEACH, Spotsylvania, VA

 

2500 GPH Submersible Waterfall Pump
Designed for continuous use, this high capacity pump generating up to 2500 gallons of water per hour supports a waterfall weir up 1-1/2 feet wide and five feet high. The energy efficient motor uses less power compared to standard water garden pumps. It provides 19 feet of total head lift and has an easy-to-remove filter for cleaning. There is no oil inside so it’s safe to use in ponds with fish.

I bought this as a replacement pump for my outdoor koi pond … This pump puts out the volume I need and is adaptable to various hose sizes. It appears easy to open to clean, no screws to remove. Good price, no complaints. – Jay, Springfield, MO

 

4500 GPH Submersible Waterfall Pump
This high-flow pump generates up to 4500 gallons per hour and supports a waterfall weir up to three feet wide and five feet high. The pump is designed for continuous use and features 23 feet total head lift. Additional features include an easy-to-remove filter for cleaning and no oil inside so it’s safe to use in ponds with fish.

Used this to replace a pump for a 2500 gallon Koi Pond. Didn’t want to spend the $350 to replace the original. This pump actually increased the waterfall pressure … CK, Ohio

 

In addition to the Creekstone line of submersible fountain pumps, Harbor Freight also carries sump pumps, sewage pumps, fuel transfer pumps, well pumps, compressor pumps and more! Check out all pumps and accessories at your local Harbor Freight Tools store.

 

Source material:
boredart.com
cozyhomeplans

Comments

  1. whisperingsage says

    Once I got the box open and read the manual for the 264 gph pump, it said it would fail if the temp went over 77 F. Why, what does it do? We are going to use this to take showers, and we will be heating the water some, not hot hot but 100 F or so. That’s just a bit over body temp.

    • Harbor Freight Tools says

      The higher temperature can cause frequent starts and stops so we wouldn’t recommend it for showering. For more detailed information, we invite you to contact our technical support group at 1-888-866-5797. Thanks!

Leave a Reply

Your email address will not be published. Required fields are marked *

*