Hammer Head Coat Rack

As Father’s Day is upon us, we at Harbor Freight thought we’d share this DIY project idea that we stumbled across recently: a relatively low-cost, low-time-consuming enterprise, creating a snazzy coat rack out of hammer heads. It occurred to us that this would make the ideal gift for that someone who likes to spend copious amounts of time in their garage, shop, cabin, studio or ice fishing shanty. While the claw hammer seems to be the predominantly popular hardware, you can use a number of different types of heads and styles. What we’re offering here is a suggested “how-to” “carpenter-style” rack that we liked. If you’re comfortable enough with your tools, by all means, have at any deviation you’d like to take:

hammer head coat rack multi 1


hammer head coat rack 3

Cutting the Wood

  • Cut the red oak rack boards 9 in. wide x 3 ft. long
  • Using your 1/2″ roundover router bit, bevel the edges
  • Measure 3/8″ from the top of the board and draw a straight line across
  • Drill eight 1/8″ holes equal distant from each other across the board and, using the #8 wood screws, assemble the rack
hammer head coat rack cut heads

Sizing Up the Hammer Heads

  • Get a feel for the right height, length and angle you want your claw hammer. Do you want it straight, or at a slight angle? Do you want 2″, 3″ or 4″ of handle? Here’s one at a long, heavy angle:
hammer head coat rack 5

  • Mark and cut one hammer handle.
  • Hold the hammer head  to the board and make sure it’s the angle and height you want. When you know, cut the other four hammer handles exactly the same way.
hammer head coat rack mount heads

Mounting the Hammer Heads

  • Pre-drill holes in the base of the handle stub with a 7/32″ drill bit
  • Pre-drill holes on the board with a 1/4″ bit
  • Mount the hammer heads on the board with the 1/4″ x 1-1/2″ tap con screws
hammer head coat rack mount angles

Mounting the Rafter Squares

  • Mark and drill four 3/16″ holes in each square, two holes on either end
  • Mount the squares to the either end of the board (as shown)

miniwax polycrylic

Protective Finish

  • The Miniwax Water-Based Polycrylic is a good coating because it can go over bare wood as well as water, and oil-based, stains. It dries quickly, doesn’t have an odor and leaves a durable shell against scuffing, etc.
  • If you prefer, you could sand the hammer handles and boards and stain it with a richer color before adding the Miniwax.
hammer head coat rack 4

Happy Father’s Day!

Once the coating is dry, your coat rack is ready to mount– or wrap for Father’s Day! If you want to scan other methods and ideas, we’ve linked each of the above photos to their respective sources. After all, there’s more than one way to skin a hammer. Meanwhile, keep in mind that Harbor Freight Tools has whatever tools you’re missing at low prices, making this project even easier!

2015 Father’s Day Gift Guide

fathers day 2015

When you think of the best parts of your childhood, Dad is indelibly among them. The smell of his after shave and brush of his stubble. The excitement of his coming home and throwing you in the air. The weird songs he chose to sing along to when driving or working in the garage (“Love is a burning thing…“). Yup, Dad is a large part of our favorite memories, so of course we somehow want to convey that to him come Father’s Day. And since he still likes to tinker in his garage, work on his car and stay busy, here are ten excellent suggestions from Harbor Freight Tools on what to get him.


3 ton steel jack low profile

This best-selling 3-ton low-profile steel jack can fit in small spaces and lift big things– and it makes the job easier, ’cause it gets the vehicle up, fast and high. Embodied with strength and durability, the heavy-duty jack rolls and maneuvers easily on concrete with its wide steel wheels, and is long enough to get way under the vehicle. A winner for anyone looking for a “heavy” jack!


13 drawer tool cabinet

For the man who has everything… something to put it in! Finally, Dad can consolidate his multiple toolboxes into this one durable, spacious cabinet. Made of heavy-duty industrial-strength steel, this baby can hold over 2,500 lbs. of tools and roll around the garage to assist him with whatever job he’s got cooking. You’d spend hundreds more elsewhere to get the same lifelong service this favorite tool cabinet will provide.


12000 winch FB

If Dad’s the kind of guy who boldly goes where no man (in their right mind) has gone before, then our Badlands 12K electric winch is the ticket. Built to be tortured and come back for more, this winch will emancipate stuck vehicles, haul downed trees and load boats. Rain? Snow? Mud? Please. Throw in the Wireless Winch Remote #61474 and Dad can Snapchat his adventures while the winch does all the work!


90 amp flux wire welder 61849

If you’ve noticed that, from time to time, Dad’s been in need of a welder– or if he’s expressed interest to get into welding– here is the perfect unit to get him equipped, With our best-selling 90 amp flux core welder, you get the functionality of a MIG welder without the hassle of gas. Set-up and operation are way easy, and the performance is awesome! Dad will find out soon enough how invaluable this welder is, for small repairs and in the garage. Pick up one of our Auto-Darkening Helmets #61611 while you’re at it.

3 gallon pancake compressor 61615

While the old man’s still got plenty of hot air to spare, why not make life easier for him by having one of these handy, reliable units in the garage? This 3-gallon oilless air compressor is a mighty mite for inflation, stapling, nailing, sanding, buffing, spray painting and all kinds of small pneumatic projects around the house. It takes very little space and tucks out of the way until it’s needed again. A nice addition in any home, shop or garage.


ladder 67646

With the ability to set up in 23 different configurations, our multi-task ladder will perform for Dad like a boss, whatever his chore. Made of super-strong aircraft-grade aluminum,  this unit can transform into 4 kinds of step ladders, 6 kinds of stair ladders, 7 types of extension ladders, 2 kinds of scaffold trestles and 4 sizes of storage ladder. We wouldn’t be surprised if it’ll make him a sandwich, but don’t quote us. As the title suggests, our multi-task ladder stretches out to 17 ft. and can easily sustain 300 lbs. And, it sells for much less than the leading competitors! (*in stores only)


10-inch miter saw 61971

This 10″ sliding compound miter saw will easily make a home in your Dad’s shop. For it’s size and price, he will be pleasantly surprised at how big a cut it makes. Great for plywood, baseboards, trim, molding, flooring– and with the switch of a blade, can also cut masonry and metal. With its robust 15 amp motor this power saw delivers precision cross, bevel and miter cuts. A great deal and a handy addition for Dad.


reciprocating saw 62370

Here’s the tool Dad will grab whenever he announces, “Stand back, Junior, and prepare to be dazzled!” Our 6″ reciprocating saw is a top-rated workhorse that cuts through heavy lumber, nails, siding, branches and roots, exhaust pipe, etc., like butter. This is the go-to tool for remodeling kitchens, tearing down porches and removing a door or window. One of the features he’ll really like is how he can control direction, making it easy to get around tricky areas. The reciprocating saw could easily become his favorite tool in the garage.


motorcycle lift 1000 lb cropped

If Dad’s a “Wild Hog,” here’s the item on the type of every rider’s wish list. With our motorcycle lift, he can wrench and clean his bike with ease, saving his back and knees,  and making it a lot less effort to get up for another tool. With just a pump of the foot, he can lift his bike to a comfortable level, safe and secure on the stand. This motorcycle life is strong, rugged and could easily be employed for commercial use. Throw in a couple of our Magnetic Bowls, and the old man will be in hog heaven!



Speaking of wrenching, may we suggest Harbor Freight’s most complete, end-all mechanic’s tool kit. At a fraction of the cost competitors’ similar sets, this professional mechanic’s tool set contains a comprehensive collection of the most-used automotive and mechanic’s tools in both SAE and metric sizes.  It’s got everything organized and clearly labeled so he won’t waste time zeroing in on the right tool or right size. Dad will not only be excited about the performance of these tools, he’ll be happy to see how many different kinds are all together in one box. As one customer put it, “Hands down, the best tool set for the money!”

Whatever you think your dad might like, chances are good you’ll find it at Harbor Freight Tools— and because of the low prices there, you’ll be able to get something really nice and look like a champ (not that you’ll ever be the champ Dad is).





Drill, Cut and Demolish with the Heavy Duty Rotary Hammer

If you need to bust through tough concrete, there’s only one way to get the job done right. The 1-1/8” 10 Amp Heavy Duty SDS Variable Speed Rotary Hammer (Item #: 69274) from Chicago Electric provides all the power you need for drilling, cutting and breaking through a variety of materials including concrete, masonry and wood. Stronger and more shock-absorbent than a hammer drill, the rotary hammer allows you to work longer with less fatigue. Plus, there’s even a stop-hammer feature that lets you use the tool as a drill giving you additional versatility!


This rotary hammer really does the job of three tools, giving you a wide range of applications to take advantage of. Whether you want to drill precision holes, tackle some heavy duty drilling or just blast through material like a demolition hammer, you can do it all with this one item, available at Harbor Freight. If you need a little extra convincing, here are a couple customer reviews that have drilled down to just what it is they love about their rotary hammer.

“After asking all my neighbors if they had a hammer drill I could borrow to drill 3 holes in the 65-year old concrete steps, I broke down and got this drill at Harbor Freight. It’s a man’s tool; no girly drill, this! It drilled the holes for the TapCon concrete screws to adhere a staircase post to the concrete step and went through like a hot knife through warm butter. I am very happy with its performance even if I’ve only used it once, so far. But, I can see a lot more uses for this big, heavy-duty drill that has made this job much easier. I actually tried to drill with my half-inch cordless yellow drill but didn’t even get a 16th of an inch in 2 minutes. I drilled all 3 with my new drill in less time! Proud to add this to my arsenal of big-boy stuff and will look for new projects to use it again.” – by Chas from Torrence, CA

“I use this hammer drill for work. I bought it almost two years ago and it has not failed me. I use it mainly for anchors in concrete (Quick Bolts) and I have drilled several hundred holes in concrete slabs with it without fail. I will put this side by side with a comparable BOSCH. Keep the lube compartment filled with grease. I do that before using every time.” – by Pat from Hagerstown, MD

“Drilled 1-1/8″ hole through a concrete wall, starting with a smaller bit size and working up. HF did not sell a 1-1/8″ bit, so I had to get one from a different source, but the HF bits through 1″ worked great. Very satisfied, especially for the price (1/3 of what comparable “name brands” would have cost).” – by Texas Dom from Grand Prairie, TX

For a variety of jobs, the 1-1/8” 10 Amp Heavy Duty SDS Variable Speed Rotary Hammer is the way to go. An adjustable 360° side handle makes it easy to use, the quick change SDS bit system keeps bits securely in place, and the low Harbor Freight costs keeps your tool budget in check. Get down to your local Harbor Freight store and grab yourself one today!



There’s nothing better than the high octane performance of a flaming charcoal barbecue– and there’s nothing cooler than manning your own 55-gallon barrel grill, made with your own hands. Here’s a cool tutorial we found on the Super Chevy website. Hey, summer’s coming, dude. Let’s talk about how you can make this a reality.

Things You Will Need:

barrel - found

  • Find a 55 gallon drum. Sometimes you can avoid buying a new one by checking out Craigslist or other local classifieds, pet shops or weed n’ feeds. The best kind of 55-gallon drum barrel to get is food related. Try to avoid one that housed toxic chemicals, but if you’re not sure what it contained, you’re going to want to burn it clean when you cut it open. 

barrel - taped

  • Rather than cutting the barrel in half, we’re going to show a clam shell it with a quarter cut. With the masking tape and a level, set all your lines ready to cut.

barrel - cut

  • The next step is to use the trusty cut-off tool and cut down the side of the barrel along the blue tape. The cut off quarter is going to be the BBQ grill’s lid. When you’ve cut out the quarter section, build a large fire inside of the barrel to thoroughly burn out any lingering harmful substances. Then, once cool,  dump the ashes and give it one last thorough hosing.
  • Next, take some angle iron and weld a rectangular shape out of it. Then weld it into place in the middle of the drum. This will provide as a rest for the grill.

barrel - mesh

  • Find a good mesh that can be used as the grill surface, preferably a heavier gauge metal, and one where the edges are flattened so there are no sharp points sticking up. If you need to flatten the sharp edges yourself, that’s what the grinder is for. Here they welded 1/8″ metal rod all along the edges and eventually added some cross bars as well. Besides not getting gouged every time you BBQ, it also makes it easier to scrub after grilling. 

barrel - stands - relief cuts

  • Take two lengths of 1/2″ box tube and make relief cuts every two inches so you can bend them to the shape of the barrel. Then bend it around the barrel.

barrel - stand - relief welded

  • Once you’ve got the shape you desire, weld the cuts smooth with your 70 amp stick welder. This creates a sturdy cradle on which you’ll be attaching the legs.

barrel - stands welded on

  • Then weld the half moon shapes to the ends of the barrel. They should make a nice snug fit.

barrel - hinges

  • Attach hinges to the barrel and lid, and reinforce it with steel plates on the inside to ensure a long-lasting, sturdy hinge.

barrel - on legs

  • Determine how high you want your grill to be (3-ft. is good) and accordingly cut the 2×1 square tubing into legs. Cut relief marks about 6″ down the legs so you can bend them outward for greater stability. Now weld on the legs, and you have your very own, cheap and efficient 55-gal. drum grill!

barrel - complete

Of course, you’ll probably want to add handles, a couple of vents, a hole on the bottom for dripping. If you came this far, though, I trust you can take it from here.

How To Wax Your Car the Right Way

Get in the habit of polishing your car routinely and you’ll have a sweet looking ride for years.

firebird - polishing

It’s no great secret that waxing and polishing your vehicle will prolong the life and beauty of its appearance. But, knowing how to wax and buff your car properly can save you a chunk o’ change over time.

The Tools

First, you’ll need a competent electric polisher. These can range from $40 into the hundreds and, as I’m sure we’ve all experienced, the highest price doesn’t necessarily mean the best. We like the Chicago Electric 7″ 5.7 Amp HD Dual Action Variable Speed Polisher #66615. It’s a real workhorse and its variable speed and oscillating head eliminate swirl marks like magic.

You’ll also need buffing pads, buffing compound and a car kit, which usually includes car polish, car wax, and microfiber cloths in kit form.

Before you do anything, wash the car first. You want your vehicle to be clean and dry before you start.


Apply a liberal amount of buffing compound to the car surface, particularly to the rough, scratched and weathered areas. The whole point of buffing is to make a rough surface a smooth one. It works by stripping away a fine layer of tired paint and exposing the fresh paint underneath; in essence, the compound serves as a paint stripper. When you wax your car immediately after buffing, the wax will restore the protective armor of its original clear coat.

Spread the compound evenly across the area with the buffing pad, while the buffer is OFF, so that it doesn’t splatter onto surrounding surfaces. For example, keep the compound off the chrome, glass or rubber.

Turn the buffer on and work the area in circular motions, holding the pad completely flat at all times. Turning the buffer at an angle or applying too much pressure can burn the paint surface and cause swirling. Work one quarter of a panel at a time until you get a bright gloss. The surface should feel smooth and look new.

firebird - polishing 2

If the paint’s in decent condition and only needed some TLC, follow the same steps as above, but this time use car polish instead of buffing compound. You won’t need as much polish as compound because polish can cover a greater area and strips away less paint. Follow the process across the vehicle’s entire surface until the paint is restored.

Buffing should be done about once a year, and if you keep the car in the garage and the paint still looks decent, just use the polish instead of the compound. If, on the other hand, you live on the coast (or you’re in an area where salt is used to melt ice) and the car’s kept outside, you may want to buff more than once a year. Or, if you keep it parked under a tree where sap and bird poop reside, you should make it a habit to buff the car 2-3 times a year.


Wax in conditions between 55° and 85° F, preferably on the cooler side. In hot weather, the wax dries as soon as you apply it to the surface, making buffing difficult. It can also make the wax hard to remove once applied. In colder weather, the wax is hard to move around and apply as well. In a perfect world, you’ll be able to wax your car in the garage or under cover, away from the sun’s rays. Sunlight can heat the car up and leave a waxy residue which can be a bear to remove.

The wax you choose is important, too. The best wax for your car contains carnauba; we like Meguiar’s.

Replace the buffer pad with a new, clean one. Spread car wax evenly over the car’s surface, gently pulsing the polisher’s trigger (as opposed to keeping it running continuously) running the pad over the surface in circular motions with about 3-5 lbs. of pressure. By doing this, you make sure the car wax doesn’t clump or cake on the surface. Only cover a quarter of the panel at a time before removing the wax. Don’t let the wax sit too long on your car. This will cause it to dry to your car and leave obvious marks. Some waxes will require a set time before removal, so refer to the directions on the bottle. Use a soft microfiber cloth to remove the wax, using circular motions to get that spiffy high gloss.

Repeat the process across the entire surface of the paint.

firebird - polished 3

Because the rule of thumb is to wax your car every three months (but don’t buff every time you wax), you should become a master at it in no time. Your car will look great, your cul-de-sac’s property value will go up and you’ll finally be able to punch that bully on the beach (“Thanks, Harbor Freight!”)


10 in. Sliding Compound Miter Saw

Whether you’re a DIYer or professional contractor, a sliding compound miter saw is a must-have for making cross, bevel and miter cuts. Take the 10 In. Sliding Compound Miter Saw from Harbor Freight—it features a powerful 15 amp motor, easy access brushes and dual linear slide rails which provide stability for making smooth, precise cuts. Plus, the saw makes miter cuts up to 12 inches wide and has a 45 degree tilting blade. Thanks to Harbor Freight’s Quality Assurance Team and feedback from customers like you, Harbor Freight has made this workhorse even better. Here’s what actual users are saying about it:

[Harbor Freight] has apparently been listening.  Fence and arm were perfectly aligned. Laser was easily adjusted and aligned to the blade. Laser now has a separate on/off switch. Came with a lumber hold down clamp, batteries for the laser and a hex wrench for the blade. Cuts great.  — Smoke, NC

Well worth the money. Comes with replacement brushes. Cool! — David, Sacramento, CA

I used this saw for a home improvement project and it worked so well. The measurements were right on and I love the laser light. Helped make the job more professional. — randyc, Charles Town, WV

I bought this saw because I was not able to cut anything over 6 inches with my other miter saw. After using this saw, I don’t even use the other miter saw anymore. — elvoiles, KY

For the garage, shop or worksite, the 10 In. Sliding Compound Miter Saw will be your go-to time and time again! And with Harbor Freight’s ridiculously low prices and 600+ stores nationwide, it’s time get one!

10 In. Sliding Compound Miter Saw
item #: 61971

How to Build a Dog House


The housing market is tough—but it doesn’t have to be for man’s best friend. Here is a great article on How to Build a Dog House complete with the tools and materials you’ll need. The great news is that all of the tools required are available through Harbor Freight at ridiculously low prices!

Tape Measure

Speed Square

Carpenter’s Pencil

Circular Saw

Chop Saw




 Framing Hammer

Staple Gun

Socket Wrench

Adjustable Wrench


Happy building and have fun putting a “ruff” over your pooch’s head!

Portable Workbenches, Mobile Stands and Sawhorses

When working on a project for a particular space, it’s a lot easier to actually be working NEAR that space. That’s why Harbor Freight Tools has no shortage of portable work stations, tool stands, work benches, etc. , so you can forego the ol’ back-and-forth and just get the job done. We’re sure that, with all these choices, you’re going to find just what you need at a price you’ll definitely appreciate:


tool stand

29″ HD Tool Stand

Central-Machinery 29″ Heavy-Duty Tool Stand #95128

By adding your own bench top, this tool stand will accommodate scroll saws, band saws, miter saws, chop saws, drill presses, sanders and toolboxes up to 300 lbs.! The stand’s width extends to make room for larger tools as well. It comes in a powder coat finish to fight rust and no-mar feet to protect your floor. This sweet tool stand sets your equipment at the perfect height for work in the shop, garage or out on the patio.



Adjustable Height HD Workstation

 US General Adjustable Height Heavy Duty Workstation #46725

If you’ve got a saw, scraper, sander, grinder, drill press, or need a sturdy mobile workstation for your garage projects, you’re gonna love this tool table! Besides being an awesome stand for your tool-of-the-moment, it’s got magnetic strips to hold screws, bolts, etc., while you’re doing your thing, and can take up to 1,000 lbs. of tools and equipment! The workstation also has two shelves to store stuff, making this an ideal companion for any metal, wood or auto job.


folding clamping workbench

Folding Clamping Workbench

US General Folding Clamping Workbench with Movable Pegs #47844

When you’re pinched for space– and green– this sturdy, low-priced workbench is the ticket. It features a protractor scale and 24″ inch ruler with SAE and metric markings, making it easy to work on jobs where measuring and marking come into play. You can easily mount bench-top tools onto the hardy birch veneer tabletop, or use it as a stand. The folding workbench also has four movable pegs and 24 very handy slots for quick access to your tools. Very light and mobile, but don’t let its under-12-lb. demeanor fool you. This is a formidable workbench for all projects that need a table.


roller stand

132-lb. Capacity Roller Stand

 Haul-Master 132 lb. Capacity Roller Stand #68898

Our roller support stand is the perfect companion for your portable workbench or table. It adjusts from 26-3/4″ to 42-3/4″ and comes with a heavy-duty ball bearing roller for easy handling of wide or long boards on table saws, drill presses, band saws, etc. It’s also got an extra-wide base for solid support and the steel roller won’t blemish your work pieces. Use it for wrought iron, PVC, plywood, etc. The roller stand folds and unfolds easily for quick storage, retrieval and transport. In short time you will find this roller stand pay for itself over and over, again.

folding power tool stand

Folding Power Tool Stand

Central-Machinery Mobile Folding Power Tool Stand #40612

Another solution for when you’re hurting on space or tend to move your projects around from place to place, is this Mobile Folding Power Tool Stand. DIYers with saws, sanders or the need of a mobile work table can benefit from this rugged folding tool bench. It features extension wings with rollers to stabilize any large pieces you’re working on and can support up to 550 lbs. then when you’re done, it just folds away for easy and compact storage, making it an ideal solution for any metal, wood, plumbing job or hobby enthusiast.


foldable adjustable sawhorse

Foldable Adjustable Sawhorse

 Central-Machinery Foldable Adjustable Sawhorse #69059

You’ll be surprised how useful and convenient these adjustable sawhorses really are. They hold up to 440 lbs. and fold down to a compact 3″ thick for economical storage in the garage– or behind a truck seat!
It’s constructed of 13-gauge steel and adjusts from 25″ to 35-1/2″ high with a spring-loaded mechanism. The foldable sawhorse also comes with a carry handle and has a non-slip rubber coating on its top surface. Get a couple of these and a flat of plywood, you could take your work outside and enjoy the weather, or bring it to the needed job for easy, close access to do the task.
sawhorse 2-set

Plastic Sawhorse 2-Set

350 Lb. Capacity Sawhorses, 2 Piece Set #47782

These rugged sawhorses weigh less than 4 pounds each, yet can sustain 350 lbs. each! With incredibly easy mobility, they fold up and transport effortlessly wherever you need them. They also fold up and store flat when not in use. And since they’re made of  injection molded PVC, they won’t rust if left outside or exposed to the elements. A great addition to your arsenal for mobile work.

So, take a stand– or a few! With so little investment and so much practical assistance, you’ll wonder why you didn’t grab them long ago. Also, visit Harbor Freight Tools for all your other shop, auto and outdoor tool needs (don’t forget the coupons!). We guarantee you’ll find something you like with every visit!

Harbor Freight’s 2015 Harby Awards


The Academy Awards are fast upon us—who cares! What’s much more exciting is the Academy Awards of Harbor Freight Tools of which winners take home the coveted “Harby”!

Here are the nominees:

Best Sound

This year, three major contenders are vying for the Harby for Best Sound. All have delivered strong performances this past year. It’s Ooga vs. Bad Boy vs. Super-Loud for the ultimate sound-off during this year’s Harby Awards!

110 dB Old Fashioned Sound Ooga 12V Air Horn

110 dB Old Fashioned Sound “Ooga” 12V Air Horn
item #: 96291

Bad Boy 12V Air Horn

Bad Boy™ 12V Air Horn
item #: 94117

135 dB Super-Loud 12V Air Horn

135 dB Super-Loud 12V Air Horn
item #: 40134


Best Cinematography

The story is told through the eye of a lens. If the lens doesn’t see it, we don’t see it. This year’s nominees captured the movements and moments that compel led us to watch over and over again.

8 Channel Surveillance DVR with 4 Cameras and Mobile Monitoring Capabilities

8 Channel Surveillance DVR with 4 Cameras and Mobile Monitoring Capabilities
item #: 61229

Weatherproof Color Security Camera with Night Vision

Weatherproof Color Security Camera with Night Vision
item #: 95914

High Resolution Digital Inspection Camera with Recorder

High Resolution Digital Inspection Camera with Recorder
item #: 60695


Most Original Tool

Always a competitive category and this year is proving to be no different. Past winners include the Pneumatic Planishing Hammer and the always popular Chain Saw Chain Breaker/Spinner. This year though, the three contenders are promising to make this contest extremely close!


English Wheel Kit with Stand

English Wheel Kit with Stand
item #: 68385


Pipe Tubing Notcher

Pipe/Tubing Notcher
Item #: 42324

Throatless Shear

Throatless Shear
item #: 38413


Best Supporting Tool

A main tool’s performance is often enhanced by uplifting accessories. Sometimes, the primary tool simply couldn’t function without a strong supporting cast—or supporting cast iron depending on the tool. This year witnessed some noteworthy supporting roles…

Folding Tile Saw Stand with Wheels

Folding Tile Saw Stand with Wheels
item #: 69325

3 Ton Steel Jack Stands

3 Ton Steel Jack Stands
item #: 61196

Welding Cabinet

Welding Cabinet
item #: 61705


Best Director

Some tools are strongest when directing the way, whether it’s down to the ground, up to the stars or somewhere in between…


Plumb Bob With 15 Ft. Line

Plumb Bob With 15 Ft. Line
item #: 66271

Brass Sextant

Brass Sextant
item #: 66096

Self-Leveling Laser Level Kit

Self-Leveling Laser Level Kit
item #: 69243


Best Picture

Who knew how photogenic Harbor Freight’s tools could be? While every tool is beautiful in its own way, these nominees were captured at their very best… A picture says a thousand words—which one says “Winner” this year?


3 Ton Aluminum Racing Floor Jack with RapidPump

3 Ton Aluminum Racing Floor Jack with RapidPump®
item #: 61386

9000 lb. Off-Road Vehicle Electric Winch with Automatic Load-Holding Brake

9000 lb. Off-Road Vehicle Electric Winch with Automatic Load-Holding Brake
item #: 61346

72 in. 18 Drawer Glossy Red Industrial Roller Cabinet

72 in. 18 Drawer Glossy Red Industrial Roller Cabinet
item #: 61656



Best Score

We’re not talkin’ music here, we’re talking deals that are music to your ears! Whether it’s a Parking Lot Sale purchase, using a 20% off coupon or just cashing in on Harbor Freight’s everyday low prices, these three contenders are running neck and neck for this year’s Best Score Harby!


FireShot Screen Capture #197 - 'Harbor Freight Tools (@harborfreight) • Instagram photos and videos' - instagram_com_p_yLMY1qxhNm__modal=true


Jake “The Brawl” Baxter scores the 1000 lb. Capacity Motorcycle Lift, item #: 68892 using a 20% off coupon!


FireShot Screen Capture #198 - 'Harbor Freight Tools (@harborfreight) • Instagram photos and videos' - instagram_com_p_y7cewWRhLr__modal=true

Edge Creehole and his daughter Helen (a.k.a. Hell Bent) score dueling Pipe Wrenches, the 14″ and 48″, items #: 61350 and #: 60529 respectively, during a regular father/daughter weekend trip to Harbor Freight.


Kid with Light

And then there’s Petunia Parker with the beloved 27 LED Portable Worklight/Flashlight, item #: 67227. Start ’em young…


Cast your votes which will be counted along with our panel of esteemed judges. The winners will be announced on Monday, February 23rd. And congratulations to this year’s nominees!

Four Power Tools That Bring the Love to DIY

power tool art

Considering man’s entire history on the planet, the technology of tools has certainly exploded in just the last 100 years. This is largely due to the introduction of electricity. Although many a “long-in-the-tooth” garage warrior will tell you there are still plenty of projects around better served by a hand tool, we know there are far more jobs out there where a power tool would send the hand tool packing. Besides, nothing quite makes you feel like a virile master of the universe like a live, heavy-duty power tool in your hand.

While there are many awesome and formidable-looking power tools you could put in your shop, I’m here to tell you about four that you’ll definitely want to get before the others.

Cordless Drill

18V Cordless Drill

18v Cordless Drill

Why You Want To Have It

Before you look at any other power tool, this is the one to get– the must-have for your arsenal. Most of you are probably too young to know what it’s like to hand-bore holes with a manual drill, but let me tell you, it’s nothing to get nostalgic over. Forget the blisters, the muscle fatigue, the sheer boredom– and that’s on the first hole. With a good, ample cordless power drill you’ll be able to take on a multitude of tasks in an afternoon: drill holes into sheet rock, drive screws into a 2×4, “earthquake-proof” furniture, install towel bars, and sawing circular holes in the back of your entertainment center. You get the point: If you don’t have a cordless drill in your possession, you may as well be launched on an ice floe and die.

What to Buy

When choosing a cordless drill, you want one with lots of power, which is measured by the amount of voltage in its battery. An 18v is a good size for home use, and make sure it’s got variable speeds for different jobs, and is reversible. The reversible feature will come in handy if you need to take some screws out when you realize the outhouse door needs to swing out, not in. Most competitors sell 18v models for about $100-$200. You can purchase a sturdy 18v cordless drill at Harbor Freight for $25-$55.

 Reciprocating Saw

reciprocating saw 7-5 blog

7.5 Amp Reciprocating Saw

Why You Want To Have It

From the first time he knocked down his toy blocks with vicious glee, man’s life mission is to destroy stuff. This is why the reciprocating saw is so wonderful. Whether you’re remodeling a kitchen, demolishing a carport, or doing a tricky plumbing or electrical job, few tools offer the sheer destructive force and ruthless precision of a reciprocating saw. The reciprocating saw cuts through metal, wood, drywall, cable, PVC and most other materials like they were room-temperature butter.

What To Buy

Yes, there are cordless reciprocating saws, but I don’t recommend them. Nothing can set your day into a tailspin like running out of battery power in the middle of a good demolition. The corded ones will finish the job, and, depending on what you’re doing, they’ll have plenty of power to do it quickly and efficiently. Whether or not you want to get one with a rotating handle will also depend on what you plan to be doing with it, but in most situations it isn’t necessary. At Harbor Freight, you can get a decent model for $30-$60 dollars (I tend to lean on the credo “you can never have too much power,” but again, it depends on what you’re doing with it). Also make sure you have a good assortment of blades on hand. Happy busting!

 Oscillating Multifunction Tool

oscillating multifunction tool blog

Why You Want To Have It

The oscillating multifunction power tool is the basic weapon of choice for all the small-to-midsize cutting, scraping, sanding and sawing projects on your to-do list. For all the things they do, these babies are easy on the wallet and pack the juice you need to put some real muscle into the tough jobs. The multi-tool easily cuts through cable, air ducts, downspouts, plasterboard and pipes… sands down cement, concrete, stone, plaster, tile adhesive, paint and wood . . . it can even saw through wood up to 2″ thick! It’s definitely a “go-to” tool for remodeling and repair jobs, as well as hobbies, tile, car repairs, even scraping freshly painted windows or old floor coverings. Get one of these in your hands and you’ll wonder how you ever managed this far in life without it.

What To Buy

Here’s another case of cordless vs. corded, and again, I say get the corded. Don’t get me wrong, there are some quality cordless multi-tools out there, too, but I keep thinking of that scenario when the power drains down just when you were making some headway. Still, there will be those rare occasions when you need a corded one, so get both– they’re cheap enough– just make sure you have the corded one first. Also take the time to peruse the myriad of attachments made for this wonder tool. You can walk out of Harbor Freight with an oscillating multifunction tool for $20-$40.

 Circular Saw

circular saw blog
Why You Want To Have It

If you genuinely enjoy the long, steady, back-aching activity of cutting wood with a handsaw, please disregard this section (hey, some people like yodeling). But if your projects often take you to the task of cutting stacks of 2x’s and sheet lumber, then you’d be a fool not to have a circular saw in the garage– and I pity the fool that don’t have this tool. A circular saw can do the job of a handsaw in 1/10th the time, and frees you from the blisters and sore muscles that often accompany the hand tool alternative. Just make sure that when you get one you educate yourself on all its. safety practices. It’s also a whizz at cutting skin and bone.

What To Buy

One last time, get a corded model. There are two basic types of circular saws: the smaller traditional type and the more heavy-duty “worm drive” saws. The worm drive saw cuts through wood like butter, but they’re also heavier and more unwieldy with one hand.If you’re a weekend warrior with garden-variety cutting jobs, the smaller one will be fine. If, however, you’re a professional, the worm drive will more likely be your brand of bourbon. At Harbor Freight, circular saws range from $33-$90.