HOW TO MAKE A HAMMER HEAD COAT RACK

Hammer Head Coat Rack

Instructables.com

As Father’s Day is upon us, we at Harbor Freight thought we’d share this DIY project idea that we stumbled across recently: a relatively low-cost, low-time-consuming enterprise, creating a snazzy coat rack out of hammer heads. It occurred to us that this would make the ideal gift for that someone who likes to spend copious amounts of time in their garage, shop, cabin, studio or ice fishing shanty. While the claw hammer seems to be the predominantly popular hardware, you can use a number of different types of heads and styles. What we’re offering here is a suggested “how-to” “carpenter-style” rack that we liked. If you’re comfortable enough with your tools, by all means, have at any deviation you’d like to take:

hammer head coat rack multi 1

LumberJocks.com

Materials:

hammer head coat rack 3

thechroniclesofhome.com

Cutting the Wood

  • Cut the red oak rack boards 9 in. wide x 3 ft. long
  • Using your 1/2″ roundover router bit, bevel the edges
  • Measure 3/8″ from the top of the board and draw a straight line across
  • Drill eight 1/8″ holes equal distant from each other across the board and, using the #8 wood screws, assemble the rack
hammer head coat rack cut heads

Instructables.com

Sizing Up the Hammer Heads

  • Get a feel for the right height, length and angle you want your claw hammer. Do you want it straight, or at a slight angle? Do you want 2″, 3″ or 4″ of handle? Here’s one at a long, heavy angle:
hammer head coat rack 5

LumberJocks.com

  • Mark and cut one hammer handle.
  • Hold the hammer head  to the board and make sure it’s the angle and height you want. When you know, cut the other four hammer handles exactly the same way.
hammer head coat rack mount heads

Instructables.com

Mounting the Hammer Heads

  • Pre-drill holes in the base of the handle stub with a 7/32″ drill bit
  • Pre-drill holes on the board with a 1/4″ bit
  • Mount the hammer heads on the board with the 1/4″ x 1-1/2″ tap con screws
hammer head coat rack mount angles

Instructables.com

Mounting the Rafter Squares

  • Mark and drill four 3/16″ holes in each square, two holes on either end
  • Mount the squares to the either end of the board (as shown)

miniwax polycrylic

Protective Finish

  • The Miniwax Water-Based Polycrylic is a good coating because it can go over bare wood as well as water, and oil-based, stains. It dries quickly, doesn’t have an odor and leaves a durable shell against scuffing, etc.
  • If you prefer, you could sand the hammer handles and boards and stain it with a richer color before adding the Miniwax.
hammer head coat rack 4

thechroniclesofhome.com

Happy Father’s Day!

Once the coating is dry, your coat rack is ready to mount– or wrap for Father’s Day! If you want to scan other methods and ideas, we’ve linked each of the above photos to their respective sources. After all, there’s more than one way to skin a hammer. Meanwhile, keep in mind that Harbor Freight Tools has whatever tools you’re missing at low prices, making this project even easier!

2015 Father’s Day Gift Guide

fathers day 2015

When you think of the best parts of your childhood, Dad is indelibly among them. The smell of his after shave and brush of his stubble. The excitement of his coming home and throwing you in the air. The weird songs he chose to sing along to when driving or working in the garage (“Love is a burning thing…“). Yup, Dad is a large part of our favorite memories, so of course we somehow want to convey that to him come Father’s Day. And since he still likes to tinker in his garage, work on his car and stay busy, here are ten excellent suggestions from Harbor Freight Tools on what to get him.

 

3 ton steel jack low profile

This best-selling 3-ton low-profile steel jack can fit in small spaces and lift big things– and it makes the job easier, ’cause it gets the vehicle up, fast and high. Embodied with strength and durability, the heavy-duty jack rolls and maneuvers easily on concrete with its wide steel wheels, and is long enough to get way under the vehicle. A winner for anyone looking for a “heavy” jack!

 

13 drawer tool cabinet

For the man who has everything… something to put it in! Finally, Dad can consolidate his multiple toolboxes into this one durable, spacious cabinet. Made of heavy-duty industrial-strength steel, this baby can hold over 2,500 lbs. of tools and roll around the garage to assist him with whatever job he’s got cooking. You’d spend hundreds more elsewhere to get the same lifelong service this favorite tool cabinet will provide.

 

12000 winch FB

If Dad’s the kind of guy who boldly goes where no man (in their right mind) has gone before, then our Badlands 12K electric winch is the ticket. Built to be tortured and come back for more, this winch will emancipate stuck vehicles, haul downed trees and load boats. Rain? Snow? Mud? Please. Throw in the Wireless Winch Remote #61474 and Dad can Snapchat his adventures while the winch does all the work!

 

90 amp flux wire welder 61849

If you’ve noticed that, from time to time, Dad’s been in need of a welder– or if he’s expressed interest to get into welding– here is the perfect unit to get him equipped, With our best-selling 90 amp flux core welder, you get the functionality of a MIG welder without the hassle of gas. Set-up and operation are way easy, and the performance is awesome! Dad will find out soon enough how invaluable this welder is, for small repairs and in the garage. Pick up one of our Auto-Darkening Helmets #61611 while you’re at it.

3 gallon pancake compressor 61615

While the old man’s still got plenty of hot air to spare, why not make life easier for him by having one of these handy, reliable units in the garage? This 3-gallon oilless air compressor is a mighty mite for inflation, stapling, nailing, sanding, buffing, spray painting and all kinds of small pneumatic projects around the house. It takes very little space and tucks out of the way until it’s needed again. A nice addition in any home, shop or garage.

 

ladder 67646

With the ability to set up in 23 different configurations, our multi-task ladder will perform for Dad like a boss, whatever his chore. Made of super-strong aircraft-grade aluminum,  this unit can transform into 4 kinds of step ladders, 6 kinds of stair ladders, 7 types of extension ladders, 2 kinds of scaffold trestles and 4 sizes of storage ladder. We wouldn’t be surprised if it’ll make him a sandwich, but don’t quote us. As the title suggests, our multi-task ladder stretches out to 17 ft. and can easily sustain 300 lbs. And, it sells for much less than the leading competitors! (*in stores only)

 

10-inch miter saw 61971

This 10″ sliding compound miter saw will easily make a home in your Dad’s shop. For it’s size and price, he will be pleasantly surprised at how big a cut it makes. Great for plywood, baseboards, trim, molding, flooring– and with the switch of a blade, can also cut masonry and metal. With its robust 15 amp motor this power saw delivers precision cross, bevel and miter cuts. A great deal and a handy addition for Dad.

 

reciprocating saw 62370

Here’s the tool Dad will grab whenever he announces, “Stand back, Junior, and prepare to be dazzled!” Our 6″ reciprocating saw is a top-rated workhorse that cuts through heavy lumber, nails, siding, branches and roots, exhaust pipe, etc., like butter. This is the go-to tool for remodeling kitchens, tearing down porches and removing a door or window. One of the features he’ll really like is how he can control direction, making it easy to get around tricky areas. The reciprocating saw could easily become his favorite tool in the garage.

 

motorcycle lift 1000 lb cropped

If Dad’s a “Wild Hog,” here’s the item on the type of every rider’s wish list. With our motorcycle lift, he can wrench and clean his bike with ease, saving his back and knees,  and making it a lot less effort to get up for another tool. With just a pump of the foot, he can lift his bike to a comfortable level, safe and secure on the stand. This motorcycle life is strong, rugged and could easily be employed for commercial use. Throw in a couple of our Magnetic Bowls, and the old man will be in hog heaven!

 

image_21577

Speaking of wrenching, may we suggest Harbor Freight’s most complete, end-all mechanic’s tool kit. At a fraction of the cost competitors’ similar sets, this professional mechanic’s tool set contains a comprehensive collection of the most-used automotive and mechanic’s tools in both SAE and metric sizes.  It’s got everything organized and clearly labeled so he won’t waste time zeroing in on the right tool or right size. Dad will not only be excited about the performance of these tools, he’ll be happy to see how many different kinds are all together in one box. As one customer put it, “Hands down, the best tool set for the money!”

Whatever you think your dad might like, chances are good you’ll find it at Harbor Freight Tools— and because of the low prices there, you’ll be able to get something really nice and look like a champ (not that you’ll ever be the champ Dad is).