The Quest for Fire Just Got Easier

Everyone knows that one of the essential components to camping (and surviving the elements) is the ability to make fire.  Sure, there are a few ways to go about it and if you really want to impress someone with your ingenuity and machismo, you can go down the rubbing two sticks together route.  But , if you just want to get warm and start heating up some food for the evening, you can do it the easy way, with the Magnesium Fire Starter from Harbor Freight Tools!

image_16350

 

Pocket-size and waterproof, the Magnesium Fire Starter is one tool that’s better to have and not need than the other way around.  With built-in flint, a striker knife and shaving saw, this handy tool has everything you’ll need in order to get a fire started quickly, even in damp or windy conditions.  And at just $2.79, it could be an inexpensive life-saver.  Wanna see it in action?

In case you need further evidence of this fire starter’s usefulness, here are a couple customer reviews to help spark your interest:

“I now always carry a magnesium fire starter when in the woods. About 10 years ago I was forced to spend an unplanned frigid night in the woods. I found a semi sheltered spot, improved it with some found materials, then gathered fire materials and pulled out my waterproof match tube. The supposed waterproof tube had allowed enough humidity in to turn the match heads to a brittle crust. None of them lit. It was now about 10 degrees F and pitch dark. I always carry 2 methods of fire starting, a lesson learned from my dad many years ago. I pulled out my BIC lighter and with cold numbed fingers flicked it several times until the spark wheel separated from the lighter and was lost somewhere in the leaf litter. It was a v-e-r-y long, v-e-r-y cold night, but a valuable lesson was learned. When it comes down to such a basic need, the method must be simple and bulletproof. This item meets that requirement. “ – by Veeguy from Wisconsin

“I started using this product more than 10 months ago. Since then, I have bought several more to keep in storage and packs whenever they go on sale, not that they are expensive anyway. I have tested many other similar fire-steel only and fire-steel plus magnesium bar combos, even some designed for special forces, and still haven’t found anything that beats this. The original magnesium fire starter I purchased was moved to my key chain right away and has withstood the stresses of daily wear. I still use it as I have found no need to find a replacement. The striker’s flat side produces the best sparks and shaves the magnesium the easiest, while the serrated side produces saw dust style tinder in a pinch. I have been able to take nothing but this fire starter and produce a good fire with everything from sticks up to medium-sized felled branches. It would of course be easier to use a knife and hatchet to make fire wood and tinder but as I said, this tool is able to do it if you have nothing else, and that proves its worth. The original fire starter still on my keychain is used and mistreated often, but the fire-steel is still solidly attached and the only material lost is the deep saddles I’ve carved in from using it so much. I would suggest it for anyone from avid hunters and survivalists to preppers and emergency kit builders.
– Perfect for storing away in packs without taking up much room.
– Handy chain to keep together when not in use.
– A simple, no frills, straightforward tool!
– Must have!” – by Andrew the Enthusiast from Virginia

As mentioned by Mr. Vee and Mr. Enthusiast, the Magnesium Fire Starter is a great survivalist tool that is a perfect addition to any pack, whether you’re just going out for a hike or for an extended excursion.  While you’re stocking up, be sure to also check out the 8” Survival Knife with a compass built right onto the handle.  The handle also contains a survival kit which includes a sewing kit, safety pins, buttons, fishing line and hook, 6 matches, and fire-starting paper. With these two tools in your pack, you’ll be prepared to handle just about any situation, all for under $15!

Pick Up a Handy Welding Spoon without Forking Over a Lot of Cash!

For any serious welder out there, a Welding Spoon is a must-have accessory for making your work just a little easier.  And if you’re a welding novice who has never heard of a Welding Spoon before then here’s your introduction to a great tool that will help you in filling holes while welding!  If you’re looking to create a smooth, flat surface when filling a hole in metal, you’ll need this reliable welding accessory to ensure professional results.

weldingspoon

Even though it may not be used in every project, the Welding Spoon is a tool that many professional welders consider essential.  By placing the curved copper plate behind the hole you’re trying to fill, the Spoon not only supports the weld but also absorbs the heat, allowing for a cleaner finish.  In fact, with this tool in your arsenal, you’ll be able to fill holes without leaving any evidence at all that there was a hole there in the first place.  And best of all, at just $9.49, this inexpensive item won’t leave too big a hole in your tool budget either.

And what do our customers think?

“Made welding thin sheet metal easier. Just getting back into welding and this really works well.” – by SOCAL SCOUT from Irvine, CA

Thanks, SOCAL, for that review.   Short and sweet, just like your next project will be when you have this great Welding Spoon from Harbor Freight Tools in your Welding Cabinet.  With a dimpled vinyl grip, this welding accessory is both easy and comfortable to use.  And while you may not use it often, when the time comes to fill holes in metal, you’ll be glad you filled your tool box with this simple welding accessory!

Get a Load of These Steel Loading Ramps!

Getting large equipment, ATVs, or anything heavy into the bed of your pick-up truck is now easier than ever! The days of straining your back and begging unwilling neighbors for help are gone thanks to the easy-to-use Steel Loading Ramps from Harbor Freight Tools.  With these simple ramps on hand, you’ll have no trouble loading recreational vehicles, appliances, motorbikes, and anything up to 1,000 pounds into your truck, van, or trailer.  And they’re more reliable and safer than wooden planks or self-made ramps.  Because, let’s face it, when you’re working with heavy items, safety should be priority number one.

Whether you’re taking the big air compressor out to the job site, loading your riding mower for repairs, or taking an old refrigerator off to the junk yard, there’s no telling when you might need to load up or unload some heavy stuff.  The loading ramps take a split second to set up and, when you’re done, they store easily in your truck or workshop.  And if that info doesn’t get you ramped up for these helpful items, maybe these actual customer reviews will:

“Have had these for 20 years or more. Mainly use them to load a 500 lb. electric wheelchair in my minivan (use them to load everything and anything that has wheels too… rider mower, go-cart, steam cleaner and even some things that don’t).  Well worth it.” – by stonekeeper from Pennsylvania

“These are great. Yes they are a bit heavy and don’t fold but these will get the job done. No issues and I have not flexed one yet. Use them all the time too. Abuse them also with no issues.” – by GiXeR from Midlothian, Va

“I use these all the time for loading stuff into my enclosed trailer, to load heavy boxes, etc… They are very safe and have stood up to my everyday use for the last year and half. I even ran over them once with my farm tractor, 100 HP tractor. Didn’t hurt them. So don’t be afraid to buy.” – by Dishtech43 Dave from Parts Unknown

Even if you use these ramps frequently, they hold up and make your life a little bit easier.  I certainly wouldn’t recommend running them over with your tractor but it’s nice to know that Dishtech Dave has done the research for us.  So if you’re looking for an easy way to load stuff onto your vehicle, don’t be afraid to buy these tough Steel Loading Ramps at your local Harbor Freight store!

Handle a Ton of Work with a Hand-Operated Arbor Press!

With the 1 Ton Arbor Press (Central Machinery 3552) from Harbor Freight Tools mounted to your workbench, small production and assembly jobs are a breeze! Installing and removing bearings, staking, pressing shafts and more are all done quickly and efficiently with minimal effort thanks to the 1 ton force applied by this mighty but small arbor press. Its all-metal construction combined with a large base make this arbor press sturdy and durable so you can power through a whole variety of applications! Even installation is easy with the mount holes conveniently built into the press. Just secure the tool to your workbench and you’re ready to go.

image_18449

Safely Handles Small Jobs!

In case I’m not pressing the point enough, check out what some actual customers had to say:

“I am using this press to squeeze the juice of vegetables and fruits from the production of a meat grinder. It is tough enough for that and its four inch throat guarantees a small pressing area and ensures enough pressure to adequately squeeze my fruit and vegetable pulp through a flour sack towel. That gives me juice without the pulp. I am not using it for its intended use so my comment may inspire someone else to find another non-standard use for this arbor press. I no longer work on cars professionally, but it may serve double duty at some time in the future.” — xenonracerx from Las Vegas, NV

“I use this to press bearings in and piston pins, also have fixed body panels with it. A+ and a great value cant go wrong” —  Joel from Rogers, MN

“I use this press to press in leaf spring bushing on almost all my suspension projects. I mounted it into my vise and press in all the bushing with no problem. A lot faster than using my 20 ton h frame press.” — James the fabricator from Lakewood, Wa

And I’m willing to be that James the Fabricator is telling the truth despite his profile name.  Bigger or more powerful presses can’t handle the smaller jobs tackled by the 1 ton arbor press. For smaller work pieces, you’ll want to be sure to use a press that can handle the work safely while still applying enough force. And while you’re at it, be sure to get a good look at Harbor Freight’s line of vices too. The 6″ Portable Carpenter’s Vise or the 4” Drill Press Vice are a great addition to work you may be doing on the arbor press.

You’ll be hard pressed to find another arbor press for sale at the same low cost as this one offered by Harbor Freight. Other retailers sell similar presses for much more!

A Hot Propane Torch for a Cool Price

Our customers are fired up about the small propane torch #91033 from Harbor Freight!  This hot, little item makes burning leaves, softening paint and melting ice both easy and safe!  At just $19.99, this useful torch won’t burn through your tool budget and will keep you from losing your cool during a tough job.  Plus, you still get the same high quality you’ve come to expect!

With this  trusty propane torch, you can burn weeds and driveway grass, melt ice, thaw metal pipes, destroy insect nests, start charcoals and campfires, remove stubborn, old vinyl flooring, soften paint and melt asphalt in a hurry with temperatures over 3,000° F.  The torch attaches to a standard 20 lb. propane tank and features a turbo blast trigger for maximum flame.

image_11749

Some Propane Torch Tips:

  • Never store or use propane indoors
  • Use a long-handled lighter to ignite
  • Always utilize eye protection and leather gloves when operating the torch
  • Always have a fire extinguisher nearby when using propane torches

And, here are a few reviews by actual users so you know I’m not just full of hot air:

“Great Torch. I bought this to light my charcoal since I run my bbq pit and smoker pretty frequently. Got this sucker on sale with 20% off. Connected the hose and hooked it to my propane tank in about 2 minutes. I used a flint striker to light it and I had a full load of charcoal ready to cook in about 5 minutes. I also used this to burn some weeds in the driveway and back yard. Great buy hands down!” — by dat504life from Torrance, CA

“Wow compared to my last burner, this is a 700% improvement. I was almost scared to hit the TURBO feature and I like fire!! FIRE GOOD! cant wait for the weeds next season… they don’t stand a chance. the only thing they could improve is a little longer hose, but to me the way it works is all I care about.” – by regg187 from LHC, AZ

Whether you’re in the market for a propane weed torch, a torch for removing paint from non-flammable surfaces or a general purpose propane torch for other applications, you’ll love this Propane Torch!  Get it while it’s hot!

The Truth About Fish Tape

Whether you’re a professional electrician or just running wiring in your own home, you’re going to need some fish tape.  Now, if you have no idea what fish tape is, then you’re not alone.  This highly versatile and useful piece of equipment is not one of the more well known tools out there.  However, even though it has a fairly specific use, it can be helpful in a few different situations.  Because when it comes to pushing wire, no tool does it better!

image_17244

Fish tape has nothing to do with fish and not much to do with tape so its name can be a bit misleading.  This non-conductive nylon tape is primarily used for pushing wire through insulation, ducts, and panel boxes for wiring, electrical applications and running cable.  With a steel leader and interchangeable eyelet, the fish tape helps push those wires and cables through tight or occupied areas to smoothly guide them to where they need to go.  And if you’re a do-it-yourselfer handling home projects or remodeling, this is an essential tool that will make a seemingly tough job much more simple.  Of course, maybe hearing from some actual customers will help:

“I have used this tool plumbing wire for electrical outlets and speaker wire installation on multiple occasions. I bought this tool after I bought my first house. That was 12 years ago and I am now in my 3rd home. Very good tool.” – Richard Smith from Puckett, MS

“Used this fish tape several times and it worked great. I’ve paid ten times as much for fish tape for use at work and this one I bought for home use. I can’t tell the difference. Worth the money.” – Rex Cannon from Parts Unknown

“Bought it to run cable for additional electrical outlet and routing ethernet cables. It works well.
I wondered whether this would be a good product for the price and was considering buying one of the same length at another popular hardware store for about 5-1/2 times the price. I decided to go with Harbor Freight and I am very happy with the performance of this tool.” – Tilla from Kansas City, MO

image_18476

If Rex Cannon can’t tell the difference between that high-priced fish tape and the more affordable version, then you know it’s high quality!  And with both 50 ft. and 100 ft. version s to choose from, Harbor Freight Tools has the perfect one for whatever project you have planned.  Like I said, if you’re a guy who likes to take care of things on his own, then you’ll definitely need some fish tape ready to go for when you need to handle a wiring job.  Don’t pay someone else to do a task that you can easily do yourself!  For just $6.99 for 50 feet or $14.99 for 100, you can be just as prepared as the professional electrician while saving money and time too!

Keep Cargo Secure with Reliable Ratcheting Tie-Downs

When you’re securing cargo or heavy loads, you want to make sure that you have reliable tie-downs that will keep your stuff safe and undamaged!  With the 4 pack of Ratcheting Tie-Downs, you can rest easy while transporting or securing just about anything.  These cargo straps adjust easily to fit the needs of the job, whether you’re tightening down a load in the bed of your truck or just storing materials for later use.  And with a quick release thumb button featured on each tie-down, they’re just as easy to remove.  Plus, the bright orange color makes these tough cargo straps easy to see, even in dim light!

image_11747

It’s no surprise that these Ratcheting Tie-Downs are so popular with Harbor Freight Tools customers.  At just $13.99 for this pack of four, the straps pay for themselves even with infrequent use.  Because you never know when you might need to secure materials, tools, or just about any cargo you might need to keep safe.  And best of all, you won’t have to worry about your cargo getting scuffed or marred thanks to the vinyl-covered S hooks!  But from the looks of these reviews by actual customers, you won’t have to worry about much when it comes to these great Ratcheting Tie-Downs:

“These straps are the best deal in town (esp. when on sale) and they work great. I’ve had mine for years and no troubles at all! Very durable and well made.” – by Jeffro from Raleigh, NC

“I am so impressed with this product I am seriously considering going back to HF in the morning to grab another pack of four. My old set had the bare metal edges and when tightened down would cut into my hand if I didn’t use gloves. I especially like the plastic handles on these to remedy that situation. Great product for the price.” – by BeninChesapeake from Virginia

“I used these to secure a 16′ fiberglass canoe to the top of my minivan. I drove fine down the interstate at 70mph with no problems. I have secured several things on my vehicle for transporting and never experiences any of the issues reported with bending clips, etc. Frankly for the value, they are worth it.” – by Jeff from St. Charles, MO

Don’t transport cargo or equipment again without these reliable Ratcheting Tie-Downs!  With these in your truck bed or tool kit, you’ll always be prepared to strapping down an unwieldy load.  But with the included low cost, you won’t find yourself strapped for cash!  Pick up a set at your local Harbor Freight store today and keep just about any load safe and secure.

A High Quality Racing Jack without the Jacked Up Price

Need to get under your vehicle but aren’t a genetically modified super human capable of lifting heavy items with one hand?  Well then look no further than the 1.5 Ton Aluminum Racing Jack from Harbor Freight Tools!  Singled out as “the undisputed king of the garage” by Four Wheeler magazine, the lightweight and compact floor jack lives up to its stellar reputation at a price that floors the competition.  With this workhorse jack in your arsenal, it’s the perfect way to lift up to 3,000 lbs. with just 3-1/2 pumps without putting any undue strain on your back.  At least until those genetic modifications become legal.

image_11503

“I have an older version of this jack. It is so easy to use that, even with my medical problems, I can still work on my cars. It fits under my Chevy Citation, and Chrysler New Yorker, but it has the power to lift our Mercury Villager easily! It raises the vehicle up high. When my cheap jack was stolen from under my van, I bought one of these, and I have never regretted it, even with the new lower price!” – Gary from San Diego, Ca

“I fell in love with this jack after my wife bought it for me. It’s the first jack I’ve owned where I felt I had complete control of the jack going down.  It is the main reason I like it and it’s easy on my bad back.” – Bob from Aiken, Co

“The jack worked well right out of the box. I didn’t have to bleed or adjust anything. The valve works well, the car can be lowered as abruptly or gradually as you want. I’ve used the jack for a year so far with no tricks or surprises. An excellent tool.” – Rantbot from Boston, Ma

Look, you don’t have to have a bad back to take full advantage of the awesome aluminum racing jack.  I don’t even think cyborgs like Rantbot have backs.  But for quick and easy lifting, you can’t go wrong with this tough, portable jack.  Well… I guess you can if you try to lift more than 3,000 lbs.  So, be sure to follow those instructions.  I know the guy who writes them and he spends a lot of time making sure they’re correct so don’t feel the need to test them.  We do that here.

Tool Totes for the Traveling Tradesman

Keep your tools stored and organized in a rugged, durable tool bag!  Whether it’s keeping your stuff safely stored in the shop or taking tools to the jobsite and back, a Tool Tote from Harbor Freight Tools is just the thing you need for added convenience.  Both the 12” and 19” tool totes provide maximum protection for your tools and accessories with a heavyweight polyester fabric construction and a hard rubber bottom.  And while you don’t have to work hard to benefit from one of these tool totes, they’ll hold up to the stress even when you do.

image_23936

For smaller jobs, the 12” Tool Tote handles just about everything you’d need.  With 6 inside pockets and 12 outside, you can easily fit all your basic tools and accessories.  For jobs requiring a little extra preparation or if you’re hitting a couple projects in a row, the 19” Tool Tote comes with 13 outside pockets that you can pack full without concern for ripping or tearing the tough polyester fabric.  Whichever one of these bad boys you choose, you’ll always have everything you need right at your fingertips.  So don’t be left without an essential tool!  Pick up one of these tote bags today!

The Small But Powerful Pancake Air Compressor

pancake-compressorWhether you’re a professional contractor or a weekend warrior, you’ll likely need an air compressor at some point.  But at Harbor Freight, we know that not all air compressors are created equal and sometimes you don’t need one that’s big and powerful.  For general purpose work like stapling and nailing, the Pancake Air Compressor handles just about all your light duty work and takes up less space in your garage or workshop too!  And best of all, with this handy little item placed strategically in your work space, your friends will see you as a guy who’s always prepared.  Neighbor needs air in his tires?  He’ll come right to you.  Or perhaps your child needs some detailed air brushing done for his or her art project.  You can save the day by tirelessly doing the painstaking artwork yourself!  There won’t be any monetary compensation but the smile on his face when he gets that B+ for your stellar artistry will be reward enough.

 “For doing trim work, it has plenty of air and keeps up with the nailer just fine. It is light and easy to move around and most of all it is very quiet.” Max Linzmeyer from Nevada

“I paid just under $50 and it works like a charm!” BSBRoss from Ringwood, NJ

Of course, if you want, the Pancake Air Compressor is small enough to easily hide away from family and friends too. Let’s face it, your neighbor never returned your weed-eater and you’ll be instilling a strong work ethic in your child by making them do their own darn art project.  You work hard enough as it is!  But luckily, so does this tough little air compressor.  Just in case you’re in a generous mood.  And after spending just $55.00 on this Oilless 1/3 Horsepower Pancake Air Compressor, there’s a good chance you will be.